Yep,open up your box,select/find your nand/flash chip on mainboard,reset with a little iron point the metal little joints fom the chip
First find out which pins to be used to reset !
Are do a search on `` reset nand pins on android tv box``
[DISCUSSION] Magicsee N5
-
- Posts: 9
- Joined: Wed Apr 17, 2019 9:12 pm
Too complicated, just flash stock firmware, there is no need to open up the box
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
Well you wanted help so the people here tried to. If you didn't want to open up the box you shouldn't have asked the moderator to make an IMG file for you.
I've no intention of being rude but you should know that if we are willing to help, you should be willing to search and experiment, this is not a one-side thing.
Thanks
PS: If this is the worst community ever, wait till you see other forums. You're lucky nobody got mad after you said you're going to flash stock rom, after asking for help. Flashing ROM instructions are only a YouTube search away, you should try that.
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
-
- Posts: 1
- Joined: Wed Jun 05, 2019 7:50 pm
Hello Specialists,
i flashed the ATV Expierence to my Magicsee N5 and loved the UI. Very nice looking. But i was unable to play Videos without stutter so i flashed again, and now my N5 is bricked.
The red LED is permanently on and the device is not any longer detected by windows. I guess the bootloader is broken.
I already tried to do the short on the ROM Chip.
Any idea how to fix that?
Thanks for any hint.
Regards
Thomas
i flashed the ATV Expierence to my Magicsee N5 and loved the UI. Very nice looking. But i was unable to play Videos without stutter so i flashed again, and now my N5 is bricked.
The red LED is permanently on and the device is not any longer detected by windows. I guess the bootloader is broken.
I already tried to do the short on the ROM Chip.
Any idea how to fix that?
Thanks for any hint.
Regards
Thomas
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
Nand chip shorting is the answer. Just keep trying till it works. It's not dead, it's happened to me before and it takes a lot of tries. Don't worry, it's not dead, keep trying.Pergex wrote: ↑Tue Jun 11, 2019 6:44 am Hello Specialists,
i flashed the ATV Expierence to my Magicsee N5 and loved the UI. Very nice looking. But i was unable to play Videos without stutter so i flashed again, and now my N5 is bricked.
The red LED is permanently on and the device is not any longer detected by windows. I guess the bootloader is broken.
I already tried to do the short on the ROM Chip.
Any idea how to fix that?
Thanks for any hint.
Regards
Thomas
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
Hi thx for replying
with out sd card in
EMMC:800;NAND:81;SD:800;USB:8;LOOP:12;EMMC:800;NAND:81;SD:800;USB:8;LOOP:13;EMMC:800;NAND:81;SD:800;USB:8;LOOP:14;EMMC:800;NAND:81;SD:800;USB:8;LOOP:15;EMMC:800;NAND:81;SD:800;USB:8;LOOP:16;EMMC:800;NAND:81;SD:800;USB:8;LOOP:17;EMMC:800;NAND:81;SD:800;USB:8;LOOP:18;EMMC:800;NAND:81;SD:800;USB:8;LOOP:19;EMMC:800;NAND:81;SD:800;USB:8;LOOP:1A;EMMC:800;NAND:81;SD:800;USB:8;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:800;NAND:81;SD:800;USB:8;
with sd card in
BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05
set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0 16bit @ 792MHz
Training Err PGSR0: 0x8030003f.Retry...
DX0GSR0: 0x00c730e0....
DX1GSR0: 0x00c43060....
DX2GSR0: 0x00000000....
DX3GSR0: 0x00000000....
DX0GSR2: 0x31800000....
DX1GSR2: 0x33000000....
DX2GSR2: 0x00000000....
DX3GSR2: 0x00000000....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0x8030003f.Retry...
with out sd card in
EMMC:800;NAND:81;SD:800;USB:8;LOOP:12;EMMC:800;NAND:81;SD:800;USB:8;LOOP:13;EMMC:800;NAND:81;SD:800;USB:8;LOOP:14;EMMC:800;NAND:81;SD:800;USB:8;LOOP:15;EMMC:800;NAND:81;SD:800;USB:8;LOOP:16;EMMC:800;NAND:81;SD:800;USB:8;LOOP:17;EMMC:800;NAND:81;SD:800;USB:8;LOOP:18;EMMC:800;NAND:81;SD:800;USB:8;LOOP:19;EMMC:800;NAND:81;SD:800;USB:8;LOOP:1A;EMMC:800;NAND:81;SD:800;USB:8;GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:800;NAND:81;SD:800;USB:8;
with sd card in
BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05
set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0 16bit @ 792MHz
Training Err PGSR0: 0x8030003f.Retry...
DX0GSR0: 0x00c730e0....
DX1GSR0: 0x00c43060....
DX2GSR0: 0x00000000....
DX3GSR0: 0x00000000....
DX0GSR2: 0x31800000....
DX1GSR2: 0x33000000....
DX2GSR2: 0x00000000....
DX3GSR2: 0x00000000....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0x8030003f.Retry...