[HELP] X96 mini not booting after installing ATVxperience

TX3 Mini, X96 Mini, W95 to name a few...
Posts: 6
Joined: Wed Oct 02, 2019 9:37 pm
Has thanked: 1 time

[HELP] X96 mini not booting after installing ATVxperience


Post by kbronciyo » Wed Oct 02, 2019 10:57 pm

Hi everyone, this is my first post over here. I have a problem with my box, i tried to use the AV method to install ATVxperience using sd card. I followed steps on XDA post, waited the 5 minutes, nothing happened, all this time my tv was not receiving signal from the tv box, i disconnected the device and when i connected again the boot logo from ATV showed right away but got stuck in there. I believe that i might have messed the installation process at the moment i disconnected the box. How can i start over again? is not allowing me to reflash, this time when i do the AV method, with the pre burned files this time, i have signal on my tv from the box, and it shows the green android and the installation process bar but it stops around 10% of the bar and the green android shows a red cross. To me it looks i have to install the stock firmware and flash again, but now with the pre burned files on the sd card.

Any guidance will be really appreciated. Thanks in advance.

This topic has 6 replies

You must be a registered member and logged in to view the replies in this topic.

Register Login