[HELP] x96 max bricked

[xfocus3]

i did manage to unbrick my A95X max v81 using this method :

https://noobs.tech/how-to-unbrick-your-a95x-max-tv-box/

[ionEyes]

H96Max -== UNBRICKED =-

Hi All - I bricked my H96Max.

It was so bad it would not boot into any UI on screen.
It would only go into MaskRom Mode.

BUT... I recovered it from here and what to share how I did it.

1. Launch the Factory Tool. Load your ROM. Select 'Restore'. Then click start. DO NOT touch it from here on in.
2. Hold down reset, short the pins on the board, plug into PC. This will enter mask mode.
3. When MaskMode is entered, the device will begin flashing, from Factory Tool above.
4. CRUCIAL - the device once finished flashing will 'Wait for MaskMode' again.
5. You must complete STEP 2 above again to put it into MaskMode BEFORE the timeout in Factory Tool.
6. The device will then flash the entire ROM onto the device. Factory Tool reports this is happening.

Device UNBRICKED.

Good luck.

[tuyrtuyrt2]

what is the pin on x96 mini for shorting