[HELP] FW "TX9 FAKE" - CS_905w_tx_v1.2 (TX3 MINI)

rapht1 · #1

Please help me.
I went to install the atv for s905w in this box and it ended up erasing. UBT recognizes the box when I connect to the PC, but when starting the process it displays the message:
"[0x10103005] Romcode / Initialize DDR / Download buffer / Read item data failed"

The firmware that came was this version p281-userdebug 8.1.0 opm1.171019.011 20190612 root test-keys

I have tried several roms and none. I bought it from a local seller and I have no way of asking him for the original ROM.

If anyone can help me, thank you very much.

#2

Sorry, there is no solution, unless you have original firmware from manufacturer.

topics describing your problem:
viewtopic.php?f=2&t=1431
viewtopic.php?f=2&t=1671

Ac3r3load · #3

You might be able to use this method to flash a generic s905W Firmware
https://www.youtube.com/watch?v=fsyS3p5 ... e=youtu.be

rapht1 · #4

Ac3r3load wrote: ↑Sat Mar 14, 2020 2:25 pm You might be able to use this method to flash a generic s905W Firmware

I've tried, unfortunately it doesn't work. Always the same error: But It stops at 1% with ]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed

#5

rapht1
Show full log, otherwise I would tend to an encrypted BL1, secure boot

rapht1 · #6

bumerc wrote: ↑Fri Mar 20, 2020 3:30 am rapht1
Show full log, otherwise I would tend to an encrypted BL1, secure boot

Code: Select all

[20:00:03 714][Global][Inf]--Catch DBT_DEVICEARRIVAL
[20:00:03 714][Global][Inf]--Scan usb device
[20:00:03 714][Global][Inf]--Aml scan WorldCup Device
[20:00:03 714][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:00:03 714][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:00:03 714][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:00:03 714][Global][Inf]-------->[Port0]Other device
[20:00:03 714][Global][Inf]-------->[Port1]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port2]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:00:03 714][Global][Inf]-------->[Port4]Other device
[20:00:03 714][Global][Inf]-------->[Port5]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port6]Other device
[20:00:03 714][Global][Inf]-------->[Port7]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port8]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port9]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port10]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port11]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port12]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port13]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port14]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port15]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port16]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port17]NoDeviceConnected
[20:00:03 714][Global][Inf]--Scan USB host controller complete
[20:00:03 714][Global][Inf]--Update data center with HubMap
[20:00:03 714][Global][Inf]--Insert new hub1
[20:00:03 714][Global][Inf]--Update hub1 device data
[20:00:03 714][Global][Inf]--Update HUB1-1 
[20:00:03 714][HUB1-1][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-2 
[20:00:03 714][HUB1-2][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-3 
[20:00:03 714][HUB1-3][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-4 \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:00:03 714][HUB1-4][Inf]--Update device path
[20:00:03 714][Global][Inf]--Begin thread for HUB1-4
[20:00:03 714][Global][Inf]--Burning thread HUB1-4 start
[20:00:03 714][Global][Inf]--Update HUB1-5 
[20:00:03 714][Global][Inf]--Burning thread HUB1-4 begin run
[20:00:03 714][HUB1-5][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-6 
[20:00:03 714][HUB1-6][Inf]--Update device path
[20:00:03 714][HUB1-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000003e4
[20:00:03 714][Global][Inf]--Update HUB1-7 
[20:00:03 714][HUB1-7][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-8 
[20:00:03 714][HUB1-8][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-9 
[20:00:03 714][HUB1-9][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-10 
[20:00:03 714][HUB1-10][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-11 
[20:00:03 714][HUB1-11][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-12 
[20:00:03 714][HUB1-12][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-13 
[20:00:03 714][HUB1-13][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-14 
[20:00:03 714][HUB1-14][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-15 
[20:00:03 714][HUB1-15][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-16 
[20:00:03 714][HUB1-16][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-17 
[20:00:03 714][HUB1-17][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-18 
[20:00:03 714][HUB1-18][Inf]--Update device path
[20:00:03 714][Global][Inf]--Add Hub1: \\.\USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[20:00:03 714][Global][Inf]--Scan end 
[20:00:03 777][HUB1-4][Inf]--CloneImageProxy
[20:00:03 777][Global][Inf]--OpenImg C:\Users\rapht\Desktop\TX9\aml_upgrade_package\aml_upgrade_package.img
[20:00:03 777][HUB1-4][Inf]--Connect path=Controlador Host Compatível com USB xHCI/P0/P3
[20:00:03 777][HUB1-4][Inf]--Start burning...
[20:00:03 828][HUB1-4][Inf]--------------ERASE BOOTLOADER------------
[20:00:03 938][HUB1-4][Inf]--start SendIdentifyCmd
[20:00:03 938][HUB1-4][Inf]--2-4-0-0
[20:00:03 938][HUB1-4][Inf]-------------Download DDR.USB-----------
[20:00:03 938][HUB1-4][Inf]--2-4-0-0
[20:00:03 938][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:00:04 458][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:00:04 958][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:00:05 479][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:00:05 983][HUB1-4][Inf]--Write initial succeed
[20:00:05 983][HUB1-4][Inf]--Upload encrypt at 0xc8100228
[20:00:05 983][HUB1-4][Inf]--ulValue = 0xbdfc31bc
[20:00:05 983][HUB1-4][Inf]--File change to DDR_ENC.USB
[20:00:05 983][HUB1-4][Inf]--Read encrypt value succeed
[20:00:05 983][HUB1-4][Inf]--Download DDR_ENC.USB,size: 0!
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 983][HUB1-4][Err]--Read item data error, code -1
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 991][HUB1-4][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[20:00:05 991][HUB1-4][Inf]--Close device handle 0x000003e4

rapht1 · #7

When installing a x96s 4 32gb ROM 16-04-2019, the error changes, it shows this:

Code: Select all

[20:00:03 714][Global][Inf]--Catch DBT_DEVICEARRIVAL
[20:00:03 714][Global][Inf]--Scan usb device
[20:00:03 714][Global][Inf]--Aml scan WorldCup Device
[20:00:03 714][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:00:03 714][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:00:03 714][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:00:03 714][Global][Inf]-------->[Port0]Other device
[20:00:03 714][Global][Inf]-------->[Port1]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port2]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:00:03 714][Global][Inf]-------->[Port4]Other device
[20:00:03 714][Global][Inf]-------->[Port5]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port6]Other device
[20:00:03 714][Global][Inf]-------->[Port7]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port8]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port9]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port10]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port11]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port12]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port13]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port14]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port15]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port16]NoDeviceConnected
[20:00:03 714][Global][Inf]-------->[Port17]NoDeviceConnected
[20:00:03 714][Global][Inf]--Scan USB host controller complete
[20:00:03 714][Global][Inf]--Update data center with HubMap
[20:00:03 714][Global][Inf]--Insert new hub1
[20:00:03 714][Global][Inf]--Update hub1 device data
[20:00:03 714][Global][Inf]--Update HUB1-1 
[20:00:03 714][HUB1-1][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-2 
[20:00:03 714][HUB1-2][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-3 
[20:00:03 714][HUB1-3][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-4 \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:00:03 714][HUB1-4][Inf]--Update device path
[20:00:03 714][Global][Inf]--Begin thread for HUB1-4
[20:00:03 714][Global][Inf]--Burning thread HUB1-4 start
[20:00:03 714][Global][Inf]--Update HUB1-5 
[20:00:03 714][Global][Inf]--Burning thread HUB1-4 begin run
[20:00:03 714][HUB1-5][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-6 
[20:00:03 714][HUB1-6][Inf]--Update device path
[20:00:03 714][HUB1-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000003e4
[20:00:03 714][Global][Inf]--Update HUB1-7 
[20:00:03 714][HUB1-7][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-8 
[20:00:03 714][HUB1-8][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-9 
[20:00:03 714][HUB1-9][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-10 
[20:00:03 714][HUB1-10][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-11 
[20:00:03 714][HUB1-11][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-12 
[20:00:03 714][HUB1-12][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-13 
[20:00:03 714][HUB1-13][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-14 
[20:00:03 714][HUB1-14][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-15 
[20:00:03 714][HUB1-15][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-16 
[20:00:03 714][HUB1-16][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-17 
[20:00:03 714][HUB1-17][Inf]--Update device path
[20:00:03 714][Global][Inf]--Update HUB1-18 
[20:00:03 714][HUB1-18][Inf]--Update device path
[20:00:03 714][Global][Inf]--Add Hub1: \\.\USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[20:00:03 714][Global][Inf]--Scan end 
[20:00:03 777][HUB1-4][Inf]--CloneImageProxy
[20:00:03 777][Global][Inf]--OpenImg C:\Users\rapht\Desktop\TX9\aml_upgrade_package\aml_upgrade_package.img
[20:00:03 777][HUB1-4][Inf]--Connect path=Controlador Host Compatível com USB xHCI/P0/P3
[20:00:03 777][HUB1-4][Inf]--Start burning...
[20:00:03 828][HUB1-4][Inf]--------------ERASE BOOTLOADER------------
[20:00:03 938][HUB1-4][Inf]--start SendIdentifyCmd
[20:00:03 938][HUB1-4][Inf]--2-4-0-0
[20:00:03 938][HUB1-4][Inf]-------------Download DDR.USB-----------
[20:00:03 938][HUB1-4][Inf]--2-4-0-0
[20:00:03 938][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:00:04 458][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:00:04 958][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:00:05 479][HUB1-4][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:00:05 983][HUB1-4][Inf]--Write initial succeed
[20:00:05 983][HUB1-4][Inf]--Upload encrypt at 0xc8100228
[20:00:05 983][HUB1-4][Inf]--ulValue = 0xbdfc31bc
[20:00:05 983][HUB1-4][Inf]--File change to DDR_ENC.USB
[20:00:05 983][HUB1-4][Inf]--Read encrypt value succeed
[20:00:05 983][HUB1-4][Inf]--Download DDR_ENC.USB,size: 0!
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 983][HUB1-4][Err]--Read item data error, code -1
[20:00:05 983][Global][Err]--DDR_ENC.USB
[20:00:05 991][HUB1-4][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[20:00:05 991][HUB1-4][Inf]--Close device handle 0x000003e4
[20:02:04 975][Global][War]--User click stop button
[20:02:04 975][Global][Inf]--Enable burning 0
[20:02:10 473][Global][Inf]--User click open button
[20:02:17 057][Global][Inf]--Image path C:\Users\rapht\Downloads\Compressed\x96s 4 32gb 16-04-2019\x96s 4 32gb 16-04-2019.img
[20:02:17 058][Global][Inf]--OpenImg C:\Users\rapht\Downloads\Compressed\x96s 4 32gb 16-04-2019\x96s 4 32gb 16-04-2019.img
[20:02:25 065][Global][Inf]--check img crc success! 
[20:02:25 065]Parse platform.conf 
[20:02:25 065][Global][Inf]--Parsing burning package
[20:02:25 065][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[20:02:25 065][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[20:02:25 096][Global][Inf]--Get burning key
[20:03:30 838][Global][Inf]--User click start button
[20:03:30 839][Global][Inf]--SetErase
[20:03:30 839][Global][Inf]--Enable burning 1
[20:03:30 839][Global][Inf]--Scan usb device
[20:03:30 839][Global][Inf]--Aml scan WorldCup Device
[20:03:30 847][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:03:30 847][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:03:30 848][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:03:30 848][Global][Inf]-------->[Port0]Other device
[20:03:30 848][Global][Inf]-------->[Port1]NoDeviceConnected
[20:03:30 848][Global][Inf]-------->[Port2]NoDeviceConnected
[20:03:30 849][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:30 849][Global][Inf]-------->[Port4]Other device
[20:03:30 849][Global][Inf]-------->[Port5]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port6]Other device
[20:03:30 850][Global][Inf]-------->[Port7]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port8]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port9]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port10]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port11]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port12]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port13]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port14]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port15]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port16]NoDeviceConnected
[20:03:30 850][Global][Inf]-------->[Port17]NoDeviceConnected
[20:03:30 850][Global][Inf]--Scan USB host controller complete
[20:03:30 850][Global][Inf]--Update data center with HubMap
[20:03:30 850][Global][Inf]--Update hub1 device data
[20:03:30 850][Global][Inf]--Update HUB1-1 
[20:03:30 850][HUB1-1][Inf]--Update device path
[20:03:30 850][Global][Inf]--Update HUB1-2 
[20:03:30 850][HUB1-2][Inf]--Update device path
[20:03:30 850][Global][Inf]--Update HUB1-3 
[20:03:30 850][HUB1-3][Inf]--Update device path
[20:03:30 850][Global][Inf]--Update HUB1-4 \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:30 850][HUB1-4][Inf]--Update device path
[20:03:30 850][Global][Inf]--Update HUB1-5 
[20:03:30 850][HUB1-5][Inf]--Update device path
[20:03:30 850][Global][Inf]--Update HUB1-6 
[20:03:30 851][HUB1-6][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-7 
[20:03:30 851][HUB1-7][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-8 
[20:03:30 851][HUB1-8][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-9 
[20:03:30 851][HUB1-9][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-10 
[20:03:30 851][HUB1-10][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-11 
[20:03:30 851][HUB1-11][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-12 
[20:03:30 851][HUB1-12][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-13 
[20:03:30 851][HUB1-13][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-14 
[20:03:30 851][HUB1-14][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-15 
[20:03:30 851][HUB1-15][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-16 
[20:03:30 851][HUB1-16][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-17 
[20:03:30 851][HUB1-17][Inf]--Update device path
[20:03:30 851][Global][Inf]--Update HUB1-18 
[20:03:30 851][HUB1-18][Inf]--Update device path
[20:03:30 851][Global][Inf]--Scan end 
[20:03:30 852][Global][Inf]--Burning thread HUB1-4 start
[20:03:30 903][HUB1-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000894
[20:03:30 953][HUB1-4][Inf]--New CloneImageProxy
[20:03:30 953][Global][Inf]--OpenImg C:\Users\rapht\Downloads\Compressed\x96s 4 32gb 16-04-2019\x96s 4 32gb 16-04-2019.img
[20:03:30 954][HUB1-4][Inf]--Connect path=Controlador Host Compatível com USB xHCI/P0/P3
[20:03:30 954][HUB1-4][Inf]--Start burning...
[20:03:31 005][HUB1-4][Inf]--------------ERASE BOOTLOADER------------
[20:03:31 106][HUB1-4][Inf]--start SendIdentifyCmd
[20:03:31 106][HUB1-4][Inf]--2-4-0-0
[20:03:31 106][HUB1-4][Inf]-------------Download DDR.USB-----------
[20:03:31 107][HUB1-4][Inf]--2-4-0-0
[20:03:31 107][HUB1-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[20:03:36 107][HUB1-4][Err]--ctl_write return=-116, libusb0-dll:err [control_msg] sending control message failed, win error: A operação de E/S foi anulada devido a uma saída de thread ou a uma requisição de aplicativo.


[20:03:36 107][HUB1-4][Err]--Write initial failed
[20:03:36 118][HUB1-4][Err]--[0x10102002]Romcode/Initialize DDR/Initialize PLL/USB Control setup error
[20:03:36 118][HUB1-4][Inf]--Close device handle 0x00000894
[20:03:36 121][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[20:03:36 122][Global][Inf]--Scan usb device
[20:03:36 122][Global][Inf]--Aml scan WorldCup Device
[20:03:36 123][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:03:36 123][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:03:36 123][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:03:36 124][Global][Inf]-------->[Port0]Other device
[20:03:36 124][Global][Inf]-------->[Port1]NoDeviceConnected
[20:03:36 124][Global][Inf]-------->[Port2]NoDeviceConnected
[20:03:36 124][Global][Inf]-------->[Port3]NoDeviceConnected
[20:03:36 125][Global][Inf]-------->[Port4]Other device
[20:03:36 125][Global][Inf]-------->[Port5]NoDeviceConnected
[20:03:36 125][Global][Inf]-------->[Port6]Other device
[20:03:36 125][Global][Inf]-------->[Port7]NoDeviceConnected
[20:03:36 125][Global][Inf]-------->[Port8]NoDeviceConnected
[20:03:36 125][Global][Inf]-------->[Port9]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port10]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port11]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port12]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port13]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port14]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port15]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port16]NoDeviceConnected
[20:03:36 126][Global][Inf]-------->[Port17]NoDeviceConnected
[20:03:36 126][Global][Inf]--Scan USB host controller complete
[20:03:36 126][Global][Inf]--Update data center with HubMap
[20:03:36 126][Global][Inf]--Update hub1 device data
[20:03:36 126][Global][Inf]--Update HUB1-1 
[20:03:36 126][HUB1-1][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-2 
[20:03:36 126][HUB1-2][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-3 
[20:03:36 126][HUB1-3][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-4 
[20:03:36 126][HUB1-4][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-5 
[20:03:36 126][HUB1-5][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-6 
[20:03:36 126][HUB1-6][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-7 
[20:03:36 126][HUB1-7][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-8 
[20:03:36 126][HUB1-8][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-9 
[20:03:36 126][HUB1-9][Inf]--Update device path
[20:03:36 126][Global][Inf]--Update HUB1-10 
[20:03:36 126][HUB1-10][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-11 
[20:03:36 127][HUB1-11][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-12 
[20:03:36 127][HUB1-12][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-13 
[20:03:36 127][HUB1-13][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-14 
[20:03:36 127][HUB1-14][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-15 
[20:03:36 127][HUB1-15][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-16 
[20:03:36 127][HUB1-16][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-17 
[20:03:36 127][HUB1-17][Inf]--Update device path
[20:03:36 127][Global][Inf]--Update HUB1-18 
[20:03:36 127][HUB1-18][Inf]--Update device path
[20:03:36 127][Global][Inf]--Scan end 
[20:03:36 467][Global][Inf]--Catch DBT_DEVICEARRIVAL
[20:03:36 468][Global][Inf]--Scan usb device
[20:03:36 468][Global][Inf]--Aml scan WorldCup Device
[20:03:36 470][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:03:36 470][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:03:36 470][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:03:36 471][Global][Inf]-------->[Port0]Other device
[20:03:36 471][Global][Inf]-------->[Port1]NoDeviceConnected
[20:03:36 471][Global][Inf]-------->[Port2]NoDeviceConnected
[20:03:36 471][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:36 472][Global][Inf]-------->[Port4]Other device
[20:03:36 472][Global][Inf]-------->[Port5]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port6]Other device
[20:03:36 473][Global][Inf]-------->[Port7]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port8]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port9]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port10]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port11]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port12]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port13]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port14]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port15]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port16]NoDeviceConnected
[20:03:36 473][Global][Inf]-------->[Port17]NoDeviceConnected
[20:03:36 473][Global][Inf]--Scan USB host controller complete
[20:03:36 473][Global][Inf]--Update data center with HubMap
[20:03:36 473][Global][Inf]--Update hub1 device data
[20:03:36 473][Global][Inf]--Update HUB1-1 
[20:03:36 473][HUB1-1][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-2 
[20:03:36 473][HUB1-2][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-3 
[20:03:36 473][HUB1-3][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-4 \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:36 473][HUB1-4][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-5 
[20:03:36 473][HUB1-5][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-6 
[20:03:36 473][HUB1-6][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-7 
[20:03:36 473][HUB1-7][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-8 
[20:03:36 473][HUB1-8][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-9 
[20:03:36 473][HUB1-9][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-10 
[20:03:36 473][HUB1-10][Inf]--Update device path
[20:03:36 473][Global][Inf]--Update HUB1-11 
[20:03:36 473][HUB1-11][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-12 
[20:03:36 474][HUB1-12][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-13 
[20:03:36 474][HUB1-13][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-14 
[20:03:36 474][HUB1-14][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-15 
[20:03:36 474][HUB1-15][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-16 
[20:03:36 474][HUB1-16][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-17 
[20:03:36 474][HUB1-17][Inf]--Update device path
[20:03:36 474][Global][Inf]--Update HUB1-18 
[20:03:36 474][HUB1-18][Inf]--Update device path
[20:03:36 474][Global][Inf]--Scan end 
[20:03:36 523][Global][Inf]--Burning thread HUB1-4 start
[20:03:36 573][HUB1-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x0000092c
[20:03:36 624][HUB1-4][Inf]--Connect path=Controlador Host Compatível com USB xHCI/P0/P3
[20:03:36 624][HUB1-4][Inf]--Start burning...
[20:03:36 674][HUB1-4][Inf]--------------ERASE BOOTLOADER------------
[20:03:36 775][HUB1-4][Inf]--start SendIdentifyCmd
[20:03:36 775][HUB1-4][Inf]--2-4-0-0
[20:03:36 775][HUB1-4][Inf]-------------Download DDR.USB-----------
[20:03:36 775][HUB1-4][Inf]--2-4-0-0
[20:03:36 775][HUB1-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[20:03:41 776][HUB1-4][Err]--ctl_write return=-116, libusb0-dll:err [control_msg] sending control message failed, win error: A operação de E/S foi anulada devido a uma saída de thread ou a uma requisição de aplicativo.


[20:03:41 776][HUB1-4][Err]--Write initial failed
[20:03:41 790][HUB1-4][Err]--[0x10102002]Romcode/Initialize DDR/Initialize PLL/USB Control setup error
[20:03:41 790][HUB1-4][Inf]--Close device handle 0x0000092c
[20:03:41 794][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[20:03:41 794][Global][Inf]--Scan usb device
[20:03:41 795][Global][Inf]--Aml scan WorldCup Device
[20:03:41 796][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:03:41 796][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:03:41 796][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:03:41 797][Global][Inf]-------->[Port0]Other device
[20:03:41 797][Global][Inf]-------->[Port1]NoDeviceConnected
[20:03:41 797][Global][Inf]-------->[Port2]NoDeviceConnected
[20:03:41 797][Global][Inf]-------->[Port3]NoDeviceConnected
[20:03:41 798][Global][Inf]-------->[Port4]Other device
[20:03:41 798][Global][Inf]-------->[Port5]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port6]Other device
[20:03:41 799][Global][Inf]-------->[Port7]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port8]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port9]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port10]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port11]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port12]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port13]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port14]NoDeviceConnected
[20:03:41 799][Global][Inf]-------->[Port15]NoDeviceConnected
[20:03:41 800][Global][Inf]-------->[Port16]NoDeviceConnected
[20:03:41 800][Global][Inf]-------->[Port17]NoDeviceConnected
[20:03:41 800][Global][Inf]--Scan USB host controller complete
[20:03:41 800][Global][Inf]--Update data center with HubMap
[20:03:41 800][Global][Inf]--Update hub1 device data
[20:03:41 800][Global][Inf]--Update HUB1-1 
[20:03:41 800][HUB1-1][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-2 
[20:03:41 800][HUB1-2][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-3 
[20:03:41 800][HUB1-3][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-4 
[20:03:41 800][HUB1-4][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-5 
[20:03:41 800][HUB1-5][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-6 
[20:03:41 800][HUB1-6][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-7 
[20:03:41 800][HUB1-7][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-8 
[20:03:41 800][HUB1-8][Inf]--Update device path
[20:03:41 800][Global][Inf]--Update HUB1-9 
[20:03:41 800][HUB1-9][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-10 
[20:03:41 801][HUB1-10][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-11 
[20:03:41 801][HUB1-11][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-12 
[20:03:41 801][HUB1-12][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-13 
[20:03:41 801][HUB1-13][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-14 
[20:03:41 801][HUB1-14][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-15 
[20:03:41 801][HUB1-15][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-16 
[20:03:41 801][HUB1-16][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-17 
[20:03:41 801][HUB1-17][Inf]--Update device path
[20:03:41 801][Global][Inf]--Update HUB1-18 
[20:03:41 801][HUB1-18][Inf]--Update device path
[20:03:41 801][Global][Inf]--Scan end 
[20:03:42 128][Global][Inf]--Catch DBT_DEVICEARRIVAL
[20:03:42 128][Global][Inf]--Scan usb device
[20:03:42 128][Global][Inf]--Aml scan WorldCup Device
[20:03:42 129][Global][Inf]--Host: Controlador Host Compatível com USB xHCI
[20:03:42 130][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_16021d72&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:03:42 130][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&805b3ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:03:42 131][Global][Inf]-------->[Port0]Other device
[20:03:42 131][Global][Inf]-------->[Port1]NoDeviceConnected
[20:03:42 131][Global][Inf]-------->[Port2]NoDeviceConnected
[20:03:42 132][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:42 132][Global][Inf]-------->[Port4]Other device
[20:03:42 132][Global][Inf]-------->[Port5]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port6]Other device
[20:03:42 133][Global][Inf]-------->[Port7]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port8]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port9]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port10]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port11]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port12]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port13]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port14]NoDeviceConnected
[20:03:42 133][Global][Inf]-------->[Port15]NoDeviceConnected
[20:03:42 134][Global][Inf]-------->[Port16]NoDeviceConnected
[20:03:42 134][Global][Inf]-------->[Port17]NoDeviceConnected
[20:03:42 134][Global][Inf]--Scan USB host controller complete
[20:03:42 134][Global][Inf]--Update data center with HubMap
[20:03:42 134][Global][Inf]--Update hub1 device data
[20:03:42 134][Global][Inf]--Update HUB1-1 
[20:03:42 134][HUB1-1][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-2 
[20:03:42 134][HUB1-2][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-3 
[20:03:42 134][HUB1-3][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-4 \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:03:42 134][HUB1-4][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-5 
[20:03:42 134][HUB1-5][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-6 
[20:03:42 134][HUB1-6][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-7 
[20:03:42 134][HUB1-7][Inf]--Update device path
[20:03:42 134][Global][Inf]--Update HUB1-8 
[20:03:42 134][HUB1-8][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-9 
[20:03:42 135][HUB1-9][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-10 
[20:03:42 135][HUB1-10][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-11 
[20:03:42 135][HUB1-11][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-12 
[20:03:42 135][HUB1-12][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-13 
[20:03:42 135][HUB1-13][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-14 
[20:03:42 135][HUB1-14][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-15 
[20:03:42 135][HUB1-15][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-16 
[20:03:42 135][HUB1-16][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-17 
[20:03:42 135][HUB1-17][Inf]--Update device path
[20:03:42 135][Global][Inf]--Update HUB1-18 
[20:03:42 135][HUB1-18][Inf]--Update device path
[20:03:42 135][Global][Inf]--Scan end 
[20:03:42 144][Global][Inf]--Burning thread HUB1-4 start
[20:03:42 195][HUB1-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&18ac2dfb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x0000092c
[20:03:42 246][HUB1-4][Inf]--Connect path=Controlador Host Compatível com USB xHCI/P0/P3
[20:03:42 246][HUB1-4][Inf]--Start burning...
[20:03:42 297][HUB1-4][Inf]--------------ERASE BOOTLOADER------------

#8

[mention]rapht1[/mention]

[20:00:05 983][HUB1-4][Inf]--ulValue = 0xbdfc31bc
[20:00:05 983][HUB1-4][Inf]--File change to DDR_ENC.USB
[20:00:05 983][HUB1-4][Inf]--Read encrypt value succeed
[20:00:05 983][HUB1-4][Inf]--Download DDR_ENC.USB,size: 0!
[20:00:05 983][Global][Err]--DDR_ENC.USB

Bootloader is encrypted, you can only install original FW, contact the manufacturer. No further support, sorry.

#9

Here is a firmware, from TX9 - Amlogic S905W + wireless chipset RTL8723BS topic on FT.

Nawillians · #10

with a tx3 mini version of the card cs_905w_tx_v1.2 I put a rom after success the card does not turn on and if I try to write by the burning tool of the error [0x10103005] Romcode / Initialize DDR / Download buffer / Read Item data failed. Does anyone have a solution of this error to make the box work again?

atvXperience : The Forum

[HELP] FW "TX9 FAKE" - CS_905w_tx_v1.2 (TX3 MINI)

Login • Register