[QUESTION] Leovin T9 Pro

New and faster chipset from Amlogic
Post Reply
dacia3
Posts: 5
Joined: Sun Aug 02, 2020 4:48 pm

#1

Model: Leovin T9 Pro 4/32
Operativni Sistem: Android 7.1.2 Nougat
CPU: Amlogic S905X2 Quad-core 64-bit ARM® Cortex™ -A53 up to 4x1.7GHz
GPU: Penta-core ARM® Mali™ -450 at 750MHz+
HDMI 2.0A
RAM: 4GB DDR3 (sertifikovana Branded ETT memorija)
ROM: 32GB eMMC, podrzava MicroSD(TF) do 64GB (sertifikovan Branded ETT chip)
WAN 2.4 GHz WiFi 802.11 b/g/n
LAN 10/100 M Base-T
USB 2 High speed USB 2.0
SPDIF Digitalni audio izlaz
Video format: 4Kx2K, ASF, AVI, DAT, FLV, ISO, MKV, MOV, MP4, MPEG, MPG, RMVB, TS, WMV1080P, H.264, H.265, MPEG-1, MPEG2, MPEG4, VC-1, VP9 Profile-2, WMV, . . .
Audio format: AAC, AC3, APE, DTS, FLAC, M4A, MP3, OGG, WAV, WMA,

I have the specified box and I can't insert your rom, it always throws me an error on 4 percent of the installation, can you help me, or can it be inserted into this box at all?
User avatar
em3ka
Moderator
Posts: 1683
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 125 times
Been thanked: 352 times

#2

AtvX version for (S905X2) your box was not released yet, so what ROM you trying to flash ???
dacia3
Posts: 5
Joined: Sun Aug 02, 2020 4:48 pm

#3

Experiment with s905x android 7 version v2h and 2ff everything it has to do with the experiment and will not
Acidice
Administrator & Developer
Posts: 33
Joined: Sun Aug 11, 2019 1:42 pm
Has thanked: 5 times
Been thanked: 11 times

#4

dacia3 wrote: Sun Aug 02, 2020 5:20 pm Model: Leovin T9 Pro 4/32
Operativni Sistem: Android 7.1.2 Nougat
CPU: Amlogic S905X2 Quad-core 64-bit ARM® Cortex™ -A53 up to 4x1.7GHz
GPU: Penta-core ARM® Mali™ -450 at 750MHz+
HDMI 2.0A
RAM: 4GB DDR3 (sertifikovana Branded ETT memorija)
ROM: 32GB eMMC, podrzava MicroSD(TF) do 64GB (sertifikovan Branded ETT chip)
WAN 2.4 GHz WiFi 802.11 b/g/n
LAN 10/100 M Base-T
USB 2 High speed USB 2.0
SPDIF Digitalni audio izlaz
Video format: 4Kx2K, ASF, AVI, DAT, FLV, ISO, MKV, MOV, MP4, MPEG, MPG, RMVB, TS, WMV1080P, H.264, H.265, MPEG-1, MPEG2, MPEG4, VC-1, VP9 Profile-2, WMV, . . .
Audio format: AAC, AC3, APE, DTS, FLAC, M4A, MP3, OGG, WAV, WMA,

I have the specified box and I can't insert your rom, it always throws me an error on 4 percent of the installation, can you help me, or can it be inserted into this box at all?
Please see section [ROM] atvX 4.0 Ported for S905x2 based on u211 board - this is a ported version of the latest atvx based on android 9 TV. It works for s905x2 chipsets based on the u211 board. To see which board you have, run in a terminal cat /proc/device-tree/amlogic-dt-id. Your board version should be displayed. You can try and flash that rom - if it works let me know. Use at your own RISK as I have only tested this ROM on the H96 Max device.
dacia3
Posts: 5
Joined: Sun Aug 02, 2020 4:48 pm

#5

My board is p282
User avatar
em3ka
Moderator
Posts: 1683
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 125 times
Been thanked: 352 times

#6

dacia3 wrote: Mon Aug 03, 2020 12:59 pm My board is p282
T9pro.jpg
On the card box it says S905X, but p282 = S905W (cloned device), it will be better that you post HQ photos of the PCB (both sides of the board).
You do not have the required permissions to view the files attached to this post.
User avatar
em3ka
Moderator
Posts: 1683
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 125 times
Been thanked: 352 times

#8

You have rebranded T95 S1 box with S905W cpu, but the bad part is that it has SpecTek MLC NAND memory - this storage type is not supported by atvX.
dacia3
Posts: 5
Joined: Sun Aug 02, 2020 4:48 pm

#9

that means i can't insert atvx
Post Reply