Model: Leovin T9 Pro 4/32
Operativni Sistem: Android 7.1.2 Nougat
CPU: Amlogic S905X2 Quad-core 64-bit ARM® Cortex™ -A53 up to 4x1.7GHz
GPU: Penta-core ARM® Mali™ -450 at 750MHz+
HDMI 2.0A
RAM: 4GB DDR3 (sertifikovana Branded ETT memorija)
ROM: 32GB eMMC, podrzava MicroSD(TF) do 64GB (sertifikovan Branded ETT chip)
WAN 2.4 GHz WiFi 802.11 b/g/n
LAN 10/100 M Base-T
USB 2 High speed USB 2.0
SPDIF Digitalni audio izlaz
Video format: 4Kx2K, ASF, AVI, DAT, FLV, ISO, MKV, MOV, MP4, MPEG, MPG, RMVB, TS, WMV1080P, H.264, H.265, MPEG-1, MPEG2, MPEG4, VC-1, VP9 Profile-2, WMV, . . .
Audio format: AAC, AC3, APE, DTS, FLAC, M4A, MP3, OGG, WAV, WMA,
I have the specified box and I can't insert your rom, it always throws me an error on 4 percent of the installation, can you help me, or can it be inserted into this box at all?
[QUESTION] Leovin T9 Pro
Please see section [ROM] atvX 4.0 Ported for S905x2 based on u211 board - this is a ported version of the latest atvx based on android 9 TV. It works for s905x2 chipsets based on the u211 board. To see which board you have, run in a terminal cat /proc/device-tree/amlogic-dt-id. Your board version should be displayed. You can try and flash that rom - if it works let me know. Use at your own RISK as I have only tested this ROM on the H96 Max device.dacia3 wrote: ↑Sun Aug 02, 2020 5:20 pm Model: Leovin T9 Pro 4/32
Operativni Sistem: Android 7.1.2 Nougat
CPU: Amlogic S905X2 Quad-core 64-bit ARM® Cortex™ -A53 up to 4x1.7GHz
GPU: Penta-core ARM® Mali™ -450 at 750MHz+
HDMI 2.0A
RAM: 4GB DDR3 (sertifikovana Branded ETT memorija)
ROM: 32GB eMMC, podrzava MicroSD(TF) do 64GB (sertifikovan Branded ETT chip)
WAN 2.4 GHz WiFi 802.11 b/g/n
LAN 10/100 M Base-T
USB 2 High speed USB 2.0
SPDIF Digitalni audio izlaz
Video format: 4Kx2K, ASF, AVI, DAT, FLV, ISO, MKV, MOV, MP4, MPEG, MPG, RMVB, TS, WMV1080P, H.264, H.265, MPEG-1, MPEG2, MPEG4, VC-1, VP9 Profile-2, WMV, . . .
Audio format: AAC, AC3, APE, DTS, FLAC, M4A, MP3, OGG, WAV, WMA,
I have the specified box and I can't insert your rom, it always throws me an error on 4 percent of the installation, can you help me, or can it be inserted into this box at all?
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
On the card box it says S905X, but p282 = S905W (cloned device), it will be better that you post HQ photos of the PCB (both sides of the board).
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: Sun Aug 02, 2020 4:48 pm
https://i.postimg.cc/mZ8pVDzJ/IMG-20200803-205653.jpg
https://i.postimg.cc/6qkvzndC/IMG-20200803-205705.jpg
I hope that's what you're looking for
https://i.postimg.cc/6qkvzndC/IMG-20200803-205705.jpg
I hope that's what you're looking for
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
You have rebranded T95 S1 box with S905W cpu, but the bad part is that it has SpecTek MLC NAND memory - this storage type is not supported by atvX.