[HELP] Need a working firmware x96 v88-v1.0 2017-05-23

[kurtzweber]

Hi

it seems I cannot stop the boot process with space...
see attached log

[bumerc]

Everything is fine and correct, you have already installed atvX Android 9 build, connect your box to the TV and enjoy

As soon as you have a file called aml_sdc_burn.ini on the SD card, you can no longer abort the autoboot, uboot first reads this file and starts the burn process immediately

[kurtzweber]

unfortunately not... the box is stuck at the logo:

image.png

[kurtzweber]

it seems stuck at this point:

Code: Select all

[   12.187464@0] vout: aml_tvout_mode_work: monitor_timeout

attaching the full log
thanks

[bumerc]

attaching

No, you are not allowed to use uart any more, as soon as you have connected the HDMI cable to the box, unplug the uart adapter completely and test again

Code: Select all

Error writing to serial device

[kurtzweber]

unfortunately nothing changed: I removed the serial adapter and powered the box but it's been 5 minutes and it's stuck at the logo...

[achour]

@bumerc

As requested I used Amlogic Burning Tool, check the box "erase flash" and "erase bootloader" to install the AtvX ROM.

atvX-s905x_RTL_SSV_LPDDR3_v4.0

100% successful operation, Everything works wonderfully
Thank you very much for your efforts and your contribution !!!

[bumerc]

and it's stuck at the logo...

please test again, use ABT for it, although SD card update should also work..
https://drive.google.com/file/d/11j_heO ... p=drivesdk

[kurtzweber]

Hi! I cannot have my box recognized by my ABT: when I power it on keeping the button pressed, it boots into "Android Recovery" but if I connect via USB it is not detected... I also chose "reboot to bootloader" but nothing... do you know how I can proceed? Thanks!

[kurtzweber]

never mind! I was able to do the upgrade, keep your fingers crossed, it is "loading"...