[ROM] atvX v4 - AndroidTV 9.0 (S905X)

[queyron]

Good afternoon, I installed the v4 firmware for APXXX Wi-Fi building version (I found a refilled link in the topic), I have a cdtech 2010230 chip on my TV BOX (a compatible analog of AP6255). Wi-FI doesn't turn on, what could it be? Which firmware version should I install? this is a TV box for IPTV channels SB-315 https://sever-ttk.ru/oborudovanie/pristavki#/stb from the Internet provider TTK from Russia, China production, chip 805X of course, marking on the board - CS_S905x_TX_V.1.1 https://ibb.co/mT8LK3W

[em3ka]

Is there an option to somehow insert those files into the rom before installing the rom?

Repack the FW with those files using some of the (kitchen) tools from Tutorials and Guides section.

[em3ka]

...Which firmware version should I install?...

Cdtech 201023 = Qualcomm QCA9377, install Multi Wi-Fi version from 1st post

[Johnpopet]

please does anyone have the Samsung LPDDR3?? link no longer works

I deactivated the link on purpose because there have been "ROM developers" for a short time who like to use our solutions in their own projects (such as the LPDDR3 bootloader for S905X devices etc.) and simply keep silent about this. Own names without credits are given and donate links are created.
From now on the links for exotics like LPDDR3 will only be distributed via PM.

hola necesito el firmwarre para poder actualizar una tv box v1.0 2017-05-23 y no lo puedo descargar me seria de gran ultilidad poder descargarlo o me lo envien a mi correo electronico popmaster2.0@gmail.com

modEDIT, translation
Hello, I need the firmware to be able to update a TV box v1.0 2017-05-23 and I cannot download it. It would be very useful to be able to download it or send it to my email popmaster2.0@gmail.com

[bumerc]

Hello, I need the firmware to be able to update a TV box v1.0 2017-05-23 and I cannot download it. It would be very useful to be able to download it or send it to my email popmaster2.0@gmail.com

I lost access to mega upload, if really necessary, I can build a new u-boot

[saltanar]

The link for apxxx version is not available

[em3ka]

The link for apxxx version is not available

viewtopic.php?p=22971#p22971

[koperalss]

hi! @bumerc , i tried to get the atv4 lpddr3, but failed...can i get the link tp PM

[Lishoo]

Hello everyone, I have a Magicsee N4 S905X 2G ram device, I tried to upgrade the Android firmware from 7.1.2 to 9.0 but I can't boot any other bootloader than the default one I tried almost everything but not the ones that are available by PM message.
I'm always getting thre Wrong Chip C0 message
UART LOG:

Code: Select all

XL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 142884

BL2 Built : 11:58:42, May 27 2017. 
gxl gc3c9a84 - xiaobo.gu@droid05

set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
Skip usb!
0.0;
TE: 18619713

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 12
CPU clk: 1200MHz
BL2 USB 
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 768MHz - FAIL
DDR3 chl: Rank0 @ 768MHz - FAIL
DDR3 chl: Rank0 16bit @ 768MHz
bist_test rank: 0 20 00 40 37 16 59 23 00 47 37 14 5b 2f 2f 2f 2f 2f 2f 2e 2e 2e 2e 2e 2e 692   - PASS

Rank0: 1024MB(auto)-2T-11
Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from USB, src: 0x00010000, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from USB, src: 0x00020000, des: 0x05100000, size: 0x0002c400, part: 0
0002c400Load bl33 from USB, src: 0x00050000, des: 0x01000000, size: 0x00084a00, part: 0
NOTICE:  BL3-1: v1.0(release):f5121da90
NOTICE:  BL3-1: Built : 20:18:22, Nov 22 2019
[BL31]: GXL CPU setup!
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc2
Wrong chip c0
GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 68414

The RAM layout is Micron 512m x4 (2 dices are 5GN77 D9RVW and on the other side 2 dices 5FN77 D9RVW)
The MMC is SKhynix H26M521D3FMR e-nand
chipid from uboot

Code: Select all

Serial		: 210bc2009b9d942aa3db4ba45def4bd5

version from uboot

Code: Select all

U-Boot 2015.01 (Aug 16 2018 - 12:37:19)
aarch64-none-elf-gcc (crosstool-NG linaro-1.13.1-4.8-2013.11 - Linaro GCC 2013.10) 4.8.3 20131111 (prerelease)
GNU ld (crosstool-NG linaro-1.13.1-4.8-2013.11 - Linaro GCC 2013.10) 2.23.2.20130610 Linaro 2013.10-4

Any ideas or suggestions?

Edit:
The atvX-s905x_RTL_SSV_LPDDR3_v4.0 give some other log:

Code: Select all

GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 68433

BL2 Built : 11:58:42, May 27 2017. 
gxl gc3c9a84 - xiaobo.gu@droid05

set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
Skip usb!
0.0;
TE: 18748859

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 12
CPU clk: 1200MHz
BL2 USB 
DQS-corr enabled
DDR scramble enabled
LPDDR3 chl: Rank0+1 @ 744MHz
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c230a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c43020....
DX0GSR2: 0x31800001....
DX1GSR2: 0x31800001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c231a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c43020....
DX0GSR2: 0x31000001....
DX1GSR2: 0x32000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c331a0....
DX1GSR0: 0x00c23120....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c22fa0....
DX0GSR2: 0x31800001....
DX1GSR2: 0x32000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c231a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c830a0....
DX0GSR2: 0x31000001....
DX1GSR2: 0x32000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x33800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c330a0....
DX1GSR0: 0x00c23220....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c630a0....
DX0GSR2: 0x30800001....
DX1GSR2: 0x33000001....
DX2GSR2: 0x31800001....
DX3GSR2: 0x33000001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c632a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c23020....
DX0GSR2: 0x31800001....
DX1GSR2: 0x33000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32000001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c030a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c23020....
DX0GSR2: 0x31000001....
DX1GSR2: 0x31800001....
DX2GSR2: 0x31800001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c331a0....
DX1GSR0: 0x00c230a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c22fa0....
DX0GSR2: 0x31800001....
DX1GSR2: 0x32000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
Training Err PGSR0: 0xb18011bf.Retry...
DX0GSR0: 0x00c33120....
DX1GSR0: 0x00c832a0....
DX2GSR0: 0x00c53020....
DX3GSR0: 0x00c42fa0....
DX0GSR2: 0x31000001....
DX1GSR2: 0x33000001....
DX2GSR2: 0x32000001....
DX3GSR2: 0x32800001....
DX0GSR3: 0x00000000....
DX1GSR3: 0x00000000....
DX2GSR3: 0x00000000....
DX3GSR3: 0x00000000....
DDR init fail, reset...
GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 68455

And the working bootloader

Code: Select all

BL2 Built : 11:58:42, May 27 2017. 
gxl gc3c9a84 - xiaobo.gu@droid05

set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
BL2 USB 
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0 16bit @ 792MHz
Rank0: 2048MB-2T-11
0.0;
TE: 31357722

BL2 Built : 11:58:42, May 27 2017. 
gxl gc3c9a84 - xiaobo.gu@droid05

set vcck to 1070 mv
set vddee to 1070 mv
Board ID = 12
CPU clk: 1200MHz
BL2 USB 
Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from USB, src: 0x00010000, des: 0x01100000, size: 0x0000d600
Load bl31 from USB, src: 0x00020000, des: 0x05100000, size: 0x00018400
Load bl33 from USB, src: 0x0003c000, des: 0x01000000, size: 0x00065e00
NOTICE:  BL3-1: v1.0(release):3348978
NOTICE:  BL3-1: Built : 15:44:01, May 12 2017
[BL31]: GXL CPU setup!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:ok
[Image: gxl_v1.1.3308-b30529c-dirty 2018-05-28 19:44:39]
OPS=0xc2
21 0b c2 00 9b 9d 94 2a a3 db 4b a4 5d ef 4b d5 
[31.591727 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast

[koperalss]

dear all, just to know, can we update from this v4 to v9?