[HELP] Magicsee N5 does not respond when shorting the pins

MiBox, X96 to name a few...
Post Reply
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#1

ChinoLuis wrote: ↑Thu Nov 19, 2020 1:08 pm Buenos días. Le pido ayuda para poder revivir mi Magicsee N5. Sigo los paso de los pines para conectar con Usb Burning y no me lo reconoce la pc. Sigue la luz roja y no lo toma.
Use los pasos que se mencionan en varios mensajes de los grupos y tengo resultados
Espero su ayuda. Muchas gracias.
First, follow the forum rules. Translate your posts into English and put the translation under the spoiler, otherwise your post will be deleted.
Second, we only support stuff regarding atvX firmwares.
Translation
SPOILER_SHOW
Primero, siga las reglas del foro. Traduce tus publicaciones al inglés y coloca la traducción debajo del spoiler; de lo contrario, tu publicación será eliminada.
En segundo lugar, solo admitimos cosas relacionadas con firmwares atvX.
Top
ChinoLuis
Posts: 2
Joined: Wed Nov 18, 2020 11:46 pm
Answers: 0

#2

I ask for help to revive my Magicsee N5. I installed AtvXperience V2 and it cut at 7%. From then on I couldn't restart it. I follow the steps of the pins to connect with Usb Burning and the pc does not recognize it to be able to load the stock rom and be able to update again. It follows the red light and does not take it.
Use the steps mentioned in various posts from the groups and I have results
I hope your help. Thanks a lot.
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#3

ChinoLuis wrote: ↑Thu Nov 19, 2020 5:37 pm I installed AtvXperience V2...
Did you flashed Magicsee N5 build ?
ChinoLuis wrote: ↑Thu Nov 19, 2020 5:37 pm ...pins to connect with Usb Burning and the pc does not recognize it to be able to load the stock rom...
Short pins 29-30 or 31-32...
MSN5.jpg
You do not have the required permissions to view the files attached to this post.
Top
ChinoLuis
Posts: 2
Joined: Wed Nov 18, 2020 11:46 pm
Answers: 0

#4

The 4 pins are shorted at the same time. Once plugged in usb cable to pc and power supply?
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#5

[mention]ChinoLuis[/mention]

- import (firmware) .img file in USB Burning Tool
- press Start button and leave program running
- plug in usb male to male cable, one end to the tv box and other end to the computer
- short the pins (only one pair at the time) on PCB and you should here sound
- a message connection success should appear in the UBT and flashing process will start...

Attach power cord only in case if flashing fails (with lowper error).
Top
myappletestid01
Posts: 4
Joined: Tue May 16, 2023 10:16 pm
Answers: 0
Has thanked: 2 times

#6

Wow, many thanks em3ka.
Top
Post Reply

Return to “S905X”