[HELP] TX3 Mini is dead after trying to flash with atvX

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
shrek
Posts: 1
Joined: Tue Nov 24, 2020 11:13 am

#1

So I went to flash my box with the latest ATVX to have it crash at 7% I have flashed loads of other boxes in the past with no problems and did another TX3 Mini that is used in another room and runs awsome with this firmware. But this one just wont flash and now wont boot up.

If anyone can help me even get a original firmware to just to get it to boot up I've downloads loads and tried flashing and every time get a error at the 7% mark. Error is [0x32030201]Uboot/Get result/DiskInitial error

I have attached pictures so you can all see what board it is and thanks to anyone that replies and helps

So this help others out as I have spent along time looking for firmware this file on this link works.
https://yadi.sk/d/mN6I08uv40Kq9w
You do not have the required permissions to view the files attached to this post.
Last edited by shrek on Thu Dec 03, 2020 5:38 pm, edited 2 times in total.
Post Reply