[QUESTION] atvX firmware on Mecool KII Pro (S905D)

Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#21

Hi, I think my device is broken. I can't do the pins thing. I have tried to recover it by usb burning tool and now it stays at 4% and the micro SD does not detect anything on the TV, nor by pressing the power button or anything, one way or another it does not detect a signal. Thank you
You do not have the required permissions to view the files attached to this post.
Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#22

Try shorting the eMMC pins 29-30. ( I do not know how to do it )
User avatar
em3ka
Moderator
Posts: 1678
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 125 times
Been thanked: 351 times

#23

[mention]Ramon[/mention]
- import FW .img in UBT, press START and leave program running
- hold pins 29-30 (or 31-32) shorted
- plug usb cable in tv box...
- flashing should start...
You do not have the required permissions to view the files attached to this post.
bumerc
Administrator & Developer
Posts: 1639
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 341 times

#24

[mention]Ramon[/mention]
1. Rename aml_sdc_burn.ini to aml_sdc_burn.ini.bak
2. In addition, copy aml_autoscript onto the SDcard prepared for the update
3. Short-circuit pins 29-30, switch on the KII Box and release pins 29-30 after approx. 3 seconds, wait for 2-3 sec.. and unplug KII again
4. Repeat the process that I described earlier on the previous page or use the UBT burn method.
Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#25

Thanks for your kind help, I see what you say about the short circuit pins difficult for me ... in these days I will read what you have put and I will try to do it.
Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#26

I have tried it in several ways and it does not work, now it fails at 2% download. I lock the pins and the blue led turns off but then it does not charge at all. For the usb it does not detect an hdmi signal or the microSD either.
You do not have the required permissions to view the files attached to this post.
bumerc
Administrator & Developer
Posts: 1639
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 341 times

#27

[mention]roman[/mention]
I'll do a little bootloader update, it seems to fail due to the DRAM timing, although it works great on both of my test devices.

- A uart log would be very helpful at this point
Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#28

OK thank you. With the original firmware of the Mecool K2 the same thing happens to me, both with its firmware and the original there is no way to load it.

Thank you
Ramon
Verified Member
Posts: 16
Joined: Mon Nov 11, 2019 8:57 am
Has thanked: 1 time

#29

Code: Select all

   14:19:11 599][Global][Inf]--USB_Burning_Tool soft Version: V2.1.8.0
[14:19:11 599][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
[14:19:11 646][Global][Inf]--Scan usb device
[14:19:11 646][Global][Inf]--Aml scan WorldCup Device
[14:19:11 646][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R) Serie 7/C216 - 1E2D
[14:19:11 646][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e2d&subsys_14c71043&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:19:11 646][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&746c3a8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:19:11 662][Global][Inf]--CommandLine Para: -nocrc
[14:19:11 662][Global][Inf]--OpenImg C:\Users\ramon\Downloads\aml_upgrade_package.img
[14:19:11 662]Parse platform.conf 
[14:19:11 662][Global][Inf]--Parsing burning package
[14:19:11 662][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\Aml_Burn_Tool\V2\temp
[14:19:11 662][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\Aml_Burn_Tool\V2\temp\burn_config.xml
[14:19:11 662][Global][Inf]--Get burning key
[14:19:11 756][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2da1c3be&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:19:11 756][Global][Inf]---------->[Port0]NoDeviceConnected
[14:19:11 756][Global][Inf]---------->[Port1]NoDeviceConnected
[14:19:11 756][Global][Inf]---------->[Port2]Other device
[14:19:11 756][Global][Inf]---------->[Port3]NoDeviceConnected
[14:19:11 756][Global][Inf]---------->[Port4]NoDeviceConnected
[14:19:11 756][Global][Inf]---------->[Port5]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port1]NoDeviceConnected
[14:19:11 756][Global][Inf]--Host: Controladora de host USB genérico compatible con xHCI
[14:19:11 756][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e31&subsys_14c71043&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:19:11 756][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:19:11 756][Global][Inf]-------->[Port0]Other device
[14:19:11 756][Global][Inf]-------->[Port1]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port2]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port3]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port4]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port5]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port6]NoDeviceConnected
[14:19:11 756][Global][Inf]-------->[Port7]NoDeviceConnected
[14:19:11 756][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R)Intel(R) Serie 7/C216 - 1E26
[14:19:11 756][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_14c71043&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:19:11 756][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&396083a5&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:19:11 829][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&78a5bd6&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:19:11 829][Global][Inf]---------->[Port0]NoDeviceConnected
[14:19:11 829][Global][Inf]---------->[Port1]NoDeviceConnected
[14:19:11 829][Global][Inf]---------->[Port2]NoDeviceConnected
[14:19:11 829][Global][Inf]---------->[Port3]NoDeviceConnected
[14:19:11 829][Global][Inf]---------->[Port4]NoDeviceConnected
[14:19:11 829][Global][Inf]---------->[Port5]NoDeviceConnected
[14:19:11 829][Global][Inf]-------->[Port1]NoDeviceConnected
[14:19:11 829][Global][Inf]--Scan USB host controller complete
[14:19:11 829][Global][Inf]--Update data center with HubMap
[14:19:11 829][Global][Inf]--Scan end 
[14:20:53 745][Global][Inf]--Catch DBT_DEVICEARRIVAL
[14:20:53 745][Global][Inf]--Scan usb device
[14:20:53 745][Global][Inf]--Aml scan WorldCup Device
[14:20:53 745][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R) Serie 7/C216 - 1E2D
[14:20:53 745][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e2d&subsys_14c71043&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:53 760][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&746c3a8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:53 856][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2da1c3be&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:53 856][Global][Inf]---------->[Port0]NoDeviceConnected
[14:20:53 856][Global][Inf]---------->[Port1]NoDeviceConnected
[14:20:53 856][Global][Inf]---------->[Port2]Other device
[14:20:53 856][Global][Inf]---------->[Port3]NoDeviceConnected
[14:20:53 856][Global][Inf]---------->[Port4]NoDeviceConnected
[14:20:53 856][Global][Inf]---------->[Port5]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port1]NoDeviceConnected
[14:20:53 856][Global][Inf]--Host: Controladora de host USB genérico compatible con xHCI
[14:20:53 856][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e31&subsys_14c71043&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:53 856][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:53 856][Global][Inf]-------->[Port0]Other device
[14:20:53 856][Global][Inf]-------->[Port1]\\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:20:53 856][Global][Inf]-------->[Port2]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port3]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port4]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port5]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port6]NoDeviceConnected
[14:20:53 856][Global][Inf]-------->[Port7]NoDeviceConnected
[14:20:53 856][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R)Intel(R) Serie 7/C216 - 1E26
[14:20:53 856][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_14c71043&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:53 856][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&396083a5&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:53 921][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&78a5bd6&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:53 921][Global][Inf]---------->[Port0]NoDeviceConnected
[14:20:53 921][Global][Inf]---------->[Port1]NoDeviceConnected
[14:20:53 921][Global][Inf]---------->[Port2]NoDeviceConnected
[14:20:53 921][Global][Inf]---------->[Port3]NoDeviceConnected
[14:20:53 921][Global][Inf]---------->[Port4]NoDeviceConnected
[14:20:53 921][Global][Inf]---------->[Port5]NoDeviceConnected
[14:20:53 921][Global][Inf]-------->[Port1]NoDeviceConnected
[14:20:53 921][Global][Inf]--Scan USB host controller complete
[14:20:53 921][Global][Inf]--Update data center with HubMap
[14:20:53 921][Global][Inf]--Insert new hub3
[14:20:53 921][Global][Inf]--Update hub3 device data
[14:20:53 921][Global][Inf]--Update HUB3-1 
[14:20:53 921][HUB3-1][Inf]--Update device path
[14:20:53 921][Global][Inf]--Update HUB3-2 \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:20:53 921][HUB3-2][Inf]--Update device path
[14:20:53 929][Global][Inf]--Begin thread for HUB3-2
[14:20:53 929][Global][Inf]--Burning thread HUB3-2 start
[14:20:53 929][Global][Inf]--Update HUB3-3 
[14:20:53 929][HUB3-3][Inf]--Update device path
[14:20:53 929][Global][Inf]--Burning thread HUB3-2 begin run
[14:20:53 929][Global][Inf]--Update HUB3-4 
[14:20:53 929][HUB3-4][Inf]--Update device path
[14:20:53 929][Global][Inf]--Update HUB3-5 
[14:20:53 929][HUB3-5][Inf]--Update device path
[14:20:53 929][Global][Inf]--Update HUB3-6 
[14:20:53 929][HUB3-6][Inf]--Update device path
[14:20:53 929][Global][Inf]--Update HUB3-7 
[14:20:53 929][HUB3-7][Inf]--Update device path
[14:20:53 929][Global][Inf]--Update HUB3-8 
[14:20:53 929][HUB3-8][Inf]--Update device path
[14:20:53 929][Global][Inf]--Add Hub3: \\.\USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[14:20:53 929][Global][Inf]--Scan end 
[14:20:56 908][Global][Inf]--User click start button
[14:20:56 908][Global][Inf]--SetErase
[14:20:56 908][Global][Inf]--Enable burning 1
[14:20:56 908][Global][Inf]--Scan usb device
[14:20:56 908][Global][Inf]--Aml scan WorldCup Device
[14:20:56 908][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R) Serie 7/C216 - 1E2D
[14:20:56 908][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e2d&subsys_14c71043&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:56 908][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&746c3a8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:56 940][HUB3-2][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000003bc
[14:20:56 997][HUB3-2][Inf]--CloneImageProxy
[14:20:56 997][Global][Inf]--OpenImg C:\Users\ramon\Downloads\aml_upgrade_package.img
[14:20:56 997][HUB3-2][Inf]--Connect path=Controladora de host USB genérico compatible con xHCI/P0/P1
[14:20:56 997][HUB3-2][Inf]--Start burning...
[14:20:57 020][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2da1c3be&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:57 020][Global][Inf]---------->[Port0]NoDeviceConnected
[14:20:57 020][Global][Inf]---------->[Port1]NoDeviceConnected
[14:20:57 020][Global][Inf]---------->[Port2]Other device
[14:20:57 020][Global][Inf]---------->[Port3]NoDeviceConnected
[14:20:57 020][Global][Inf]---------->[Port4]NoDeviceConnected
[14:20:57 020][Global][Inf]---------->[Port5]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port1]NoDeviceConnected
[14:20:57 020][Global][Inf]--Host: Controladora de host USB genérico compatible con xHCI
[14:20:57 020][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e31&subsys_14c71043&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:57 020][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:57 020][Global][Inf]-------->[Port0]Other device
[14:20:57 020][Global][Inf]-------->[Port1]\\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:20:57 020][Global][Inf]-------->[Port2]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port3]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port4]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port5]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port6]NoDeviceConnected
[14:20:57 020][Global][Inf]-------->[Port7]NoDeviceConnected
[14:20:57 020][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R)Intel(R) Serie 7/C216 - 1E26
[14:20:57 020][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_14c71043&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:20:57 020][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&396083a5&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:57 051][HUB3-2][Inf]--------------ERASE BOOTLOADER------------
[14:20:57 085][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&78a5bd6&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:20:57 085][Global][Inf]---------->[Port0]NoDeviceConnected
[14:20:57 085][Global][Inf]---------->[Port1]NoDeviceConnected
[14:20:57 085][Global][Inf]---------->[Port2]NoDeviceConnected
[14:20:57 085][Global][Inf]---------->[Port3]NoDeviceConnected
[14:20:57 085][Global][Inf]---------->[Port4]NoDeviceConnected
[14:20:57 085][Global][Inf]---------->[Port5]NoDeviceConnected
[14:20:57 085][Global][Inf]-------->[Port1]NoDeviceConnected
[14:20:57 085][Global][Inf]--Scan USB host controller complete
[14:20:57 085][Global][Inf]--Update data center with HubMap
[14:20:57 085][Global][Inf]--Update hub3 device data
[14:20:57 085][Global][Inf]--Update HUB3-1 
[14:20:57 085][HUB3-1][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-2 \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:20:57 085][HUB3-2][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-3 
[14:20:57 085][HUB3-3][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-4 
[14:20:57 085][HUB3-4][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-5 
[14:20:57 085][HUB3-5][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-6 
[14:20:57 085][HUB3-6][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-7 
[14:20:57 085][HUB3-7][Inf]--Update device path
[14:20:57 085][Global][Inf]--Update HUB3-8 
[14:20:57 085][HUB3-8][Inf]--Update device path
[14:20:57 085][Global][Inf]--Scan end 
[14:20:57 163][HUB3-2][Inf]--start SendIdentifyCmd
[14:20:57 163][HUB3-2][Inf]--2-4-0-0
[14:20:57 163][HUB3-2][Inf]-------------Download DDR.USB-----------
[14:20:57 163][HUB3-2][Inf]--Close device handle 0x000003bc
[14:20:57 218][HUB3-2][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000003bc
[14:20:57 281][HUB3-2][Inf]--2-4-0-0
[14:20:57 281][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:20:57 785][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:20:58 300][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:20:58 804][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:20:59 316][HUB3-2][Inf]--Write initial succeed
[14:20:59 316][HUB3-2][Inf]--Upload encrypt at 0xc8100228
[14:20:59 316][HUB3-2][Inf]--ulValue = 0xadfc318c
[14:20:59 316][HUB3-2][Inf]--Read encrypt value succeed
[14:20:59 316][HUB3-2][Inf]--Download DDR.USB,size: 49152!
[14:20:59 316][HUB3-2][Inf]--Transfer complete 49152
[14:20:59 316][HUB3-2][Inf]--Run at address 0xd9000000
[14:20:59 316][HUB3-2][Inf]--RunInRam success
[14:20:59 347][HUB3-2][Inf]--2-2-0-8-0-1-0-0
[14:20:59 347][HUB3-2][Inf]--CheckFileRunState return 8
[14:20:59 347][HUB3-2][Inf]--Run at address 0xd900c000
[14:20:59 347][HUB3-2][Inf]--RunInRam succeed
[14:21:04 349][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[14:21:04 349][Global][Inf]--Scan usb device
[14:21:04 349][Global][Inf]--Aml scan WorldCup Device
[14:21:04 349][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R) Serie 7/C216 - 1E2D
[14:21:04 349][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e2d&subsys_14c71043&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 349][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&746c3a8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 396][HUB3-2][Err]--ReadLargeMemCMD failed ret = -5
[14:21:04 396][HUB3-2][Err]--ReadPara failed
[14:21:04 454][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2da1c3be&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 454][Global][Inf]---------->[Port0]NoDeviceConnected
[14:21:04 454][Global][Inf]---------->[Port1]NoDeviceConnected
[14:21:04 454][Global][Inf]---------->[Port2]Other device
[14:21:04 454][Global][Inf]---------->[Port3]NoDeviceConnected
[14:21:04 454][Global][Inf]---------->[Port4]NoDeviceConnected
[14:21:04 454][Global][Inf]---------->[Port5]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port1]NoDeviceConnected
[14:21:04 454][Global][Inf]--Host: Controladora de host USB genérico compatible con xHCI
[14:21:04 454][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e31&subsys_14c71043&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 454][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 454][Global][Inf]-------->[Port0]Other device
[14:21:04 454][Global][Inf]-------->[Port1]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port2]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port3]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port4]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port5]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port6]NoDeviceConnected
[14:21:04 454][Global][Inf]-------->[Port7]NoDeviceConnected
[14:21:04 454][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R)Intel(R) Serie 7/C216 - 1E26
[14:21:04 454][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_14c71043&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 454][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&396083a5&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 472][HUB3-2][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[14:21:04 472][HUB3-2][Inf]--Close device handle 0x000003bc
[14:21:04 520][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&78a5bd6&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 520][Global][Inf]---------->[Port0]NoDeviceConnected
[14:21:04 520][Global][Inf]---------->[Port1]NoDeviceConnected
[14:21:04 520][Global][Inf]---------->[Port2]NoDeviceConnected
[14:21:04 520][Global][Inf]---------->[Port3]NoDeviceConnected
[14:21:04 520][Global][Inf]---------->[Port4]NoDeviceConnected
[14:21:04 520][Global][Inf]---------->[Port5]NoDeviceConnected
[14:21:04 520][Global][Inf]-------->[Port1]NoDeviceConnected
[14:21:04 520][Global][Inf]--Scan USB host controller complete
[14:21:04 520][Global][Inf]--Update data center with HubMap
[14:21:04 520][Global][Inf]--Update hub3 device data
[14:21:04 520][Global][Inf]--Update HUB3-1 
[14:21:04 520][HUB3-1][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-2 
[14:21:04 520][HUB3-2][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-3 
[14:21:04 520][HUB3-3][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-4 
[14:21:04 520][HUB3-4][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-5 
[14:21:04 520][HUB3-5][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-6 
[14:21:04 520][HUB3-6][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-7 
[14:21:04 520][HUB3-7][Inf]--Update device path
[14:21:04 520][Global][Inf]--Update HUB3-8 
[14:21:04 520][HUB3-8][Inf]--Update device path
[14:21:04 520][Global][Inf]--Scan end 
[14:21:04 585][Global][Inf]--Catch DBT_DEVICEARRIVAL
[14:21:04 585][Global][Inf]--Scan usb device
[14:21:04 585][Global][Inf]--Aml scan WorldCup Device
[14:21:04 585][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R) Serie 7/C216 - 1E2D
[14:21:04 585][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e2d&subsys_14c71043&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 585][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&746c3a8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 585][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2da1c3be&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 585][Global][Inf]---------->[Port0]NoDeviceConnected
[14:21:04 585][Global][Inf]---------->[Port1]NoDeviceConnected
[14:21:04 585][Global][Inf]---------->[Port2]Other device
[14:21:04 585][Global][Inf]---------->[Port3]NoDeviceConnected
[14:21:04 585][Global][Inf]---------->[Port4]NoDeviceConnected
[14:21:04 585][Global][Inf]---------->[Port5]NoDeviceConnected
[14:21:04 585][Global][Inf]-------->[Port1]NoDeviceConnected
[14:21:04 590][Global][Inf]--Host: Controladora de host USB genérico compatible con xHCI
[14:21:04 590][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e31&subsys_14c71043&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 590][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1b008c11&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 590][Global][Inf]-------->[Port0]Other device
[14:21:04 590][Global][Inf]-------->[Port1]\\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:21:04 590][Global][Inf]-------->[Port2]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port3]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port4]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port5]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port6]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port7]NoDeviceConnected
[14:21:04 590][Global][Inf]--Host: Controladora de host mejorada USB de la familia Chipset Intel(R)Intel(R) Serie 7/C216 - 1E26
[14:21:04 590][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_14c71043&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:21:04 590][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&396083a5&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 590][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&78a5bd6&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:21:04 590][Global][Inf]---------->[Port0]NoDeviceConnected
[14:21:04 590][Global][Inf]---------->[Port1]NoDeviceConnected
[14:21:04 590][Global][Inf]---------->[Port2]NoDeviceConnected
[14:21:04 590][Global][Inf]---------->[Port3]NoDeviceConnected
[14:21:04 590][Global][Inf]---------->[Port4]NoDeviceConnected
[14:21:04 590][Global][Inf]---------->[Port5]NoDeviceConnected
[14:21:04 590][Global][Inf]-------->[Port1]NoDeviceConnected
[14:21:04 590][Global][Inf]--Scan USB host controller complete
[14:21:04 590][Global][Inf]--Update data center with HubMap
[14:21:04 590][Global][Inf]--Update hub3 device data
[14:21:04 590][Global][Inf]--Update HUB3-1 
[14:21:04 590][HUB3-1][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-2 \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:21:04 590][HUB3-2][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-3 
[14:21:04 590][HUB3-3][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-4 
[14:21:04 590][HUB3-4][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-5 
[14:21:04 590][HUB3-5][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-6 
[14:21:04 590][HUB3-6][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-7 
[14:21:04 590][HUB3-7][Inf]--Update device path
[14:21:04 590][Global][Inf]--Update HUB3-8 
[14:21:04 590][HUB3-8][Inf]--Update device path
[14:21:04 590][Global][Inf]--Scan end 
[14:21:04 600][Global][Inf]--Burning thread HUB3-2 start
[14:21:04 659][HUB3-2][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&3d1a707&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000002bc
[14:21:04 714][HUB3-2][Inf]--Connect path=Controladora de host USB genérico compatible con xHCI/P0/P1
[14:21:04 714][HUB3-2][Inf]--Start burning...
[14:21:04 770][HUB3-2][Inf]--------------ERASE BOOTLOADER------------
[14:21:04 890][HUB3-2][Inf]--start SendIdentifyCmd
[14:21:04 890][HUB3-2][Inf]--2-4-0-0
[14:21:04 890][HUB3-2][Inf]-------------Download DDR.USB-----------
[14:21:04 890][HUB3-2][Inf]--2-4-0-0
[14:21:04 890][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:21:05 410][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:21:05 920][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:21:06 424][HUB3-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:21:06 938][HUB3-2][Inf]--Write initial succeed
[14:21:06 938][HUB3-2][Inf]--Upload encrypt at 0xc8100228
[14:21:06 938][HUB3-2][Inf]--ulValue = 0xadfc318c
[14:21:06 938][HUB3-2][Inf]--Read encrypt value succeed
[14:21:06 938][HUB3-2][Inf]--Download DDR.USB,size: 49152!
[14:21:06 938][HUB3-2][Inf]--Transfer complete 49152
[14:21:06 938][HUB3-2][Inf]--Run at address 0xd9000000
[14:21:06 938][HUB3-2][Inf]--RunInRam success
[14:21:06 970][HUB3-2][Inf]--2-2-0-8-0-1-0-0
[14:21:06 970][HUB3-2][Inf]--CheckFileRunState return 8
[14:21:06 970][HUB3-2][Inf]--Run at address 0xd900c000
[14:21:06 970][HUB3-2][Inf]--RunInRam succee     
brewclaw
Posts: 1
Joined: Wed May 05, 2021 12:17 pm

#30

does someone have the kii pro s905d 2018 firmware in .img extension for flashing via computer, i've tried the sd card .zip version but always failed, mine now running 2019 firmware but DVB-S2 option in DTV not working anymore :(
Post Reply