Hello everyone
i have xsarius pure 4k from a friend of my ,that,s bricked, i have tried several maners
The nano short 2 pins didn,t work and i have tried with sd card with out succes...
If i try the nano method nothing happens , i short pin 7 and 8 and when i try the sdcard method with hdmi also nothing happens
How can i unbrick this tv box for my friend , it,s a blue mainboard CS_905W_TX_2C_IR_V1,0 20190716 1 +8G (8191) 2019080013
i forgot to tell windows 10 usb don,t recornized the board , so it is a usb driver question ??
Thanks in advanced
[HELP] Xsarius Pure 4K, bricked
-
- Experienced Member
- Posts: 74
- Joined: Fri Jan 15, 2021 10:48 pm
- Has thanked: 26 times
- Been thanked: 2 times
my laptop only reacts when i plug in above the otg port ,then the laptop says usb not recornized.
when i plug in the otg port , only the lights goes on . usb port don,t make a peep or comes with a reaction
when i plug in the otg port , only the lights goes on . usb port don,t make a peep or comes with a reaction
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Change USB Burning Tool to 2.1.7.x version and disable driver signature verification (Windows 10), otherwise check in windows device manager if WorldCup drivers are installed.
You do not have the required permissions to view the files attached to this post.
-
- Experienced Member
- Posts: 74
- Joined: Fri Jan 15, 2021 10:48 pm
- Has thanked: 26 times
- Been thanked: 2 times
We come closer i have installed 2.1.7 and disabled signature . But no worldcup drivers in device manager, i have worldcup also tried mannualyem3ka wrote: ↑Sat Jan 16, 2021 4:37 pmChange USB Burning Tool to 2.1.7.x version and disable driver signature verification (Windows 10), otherwise check in windows device manager if WorldCup drivers are installed.
forum_30.png
You do not have the required permissions to view the files attached to this post.