Page 1 of 1
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Mon Dec 17, 2018 12:22 pm
by kryspus
Hi,
I would like to install some of yours atvxperience ROMs. I have tried few versions, included one for s905w (vFF).
But every time i tring to install some of these ROMs, I recive error in USB Burning tools at 98% saying: "partition bootloader/verify partition/error result"
I have found some two different (not atvxperience) roms that worked for me, and i have tried to install atv vF ROM via UPDATE.apk in running box. I've installed TWRP and durring flashing ROM in the middle of progess bar - while "/system" coping i recive some kind of error.
Here is my motherboard TV BOX screen.
My device MXQ Pro 4k s905x(like screen say) p212 (like the third apps say) 1G
https://ibb.co/s9Fmw4Y
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Mon Dec 17, 2018 4:17 pm
by redacted
kryspus wrote: ↑Mon Dec 17, 2018 12:22 pm
Hi,
I would like to install some of yours atvxperience ROMs. I have tried few versions, included one for s905w (vFF).
But every time i tring to install some of these ROMs, I recive error in USB Burning tools at 98% saying: "partition bootloader/verify partition/error result"
I have found some two different (not atvxperience) roms that worked for me, and i have tried to install atv vF ROM via UPDATE.apk in running box. I've installed TWRP and durring flashing ROM in the middle of progess bar - while "/system" coping i recive some kind of error.
Here is my motherboard TV BOX screen.
My device MXQ Pro 4k s905x(like screen say) p212 (like the third apps say) 1G
I'll be releasing v2g shortly, try that and let me know
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Mon Dec 17, 2018 9:51 pm
by carlosadm
Mine fails at "Downloading UBOOT" phase, with a [0x10303004] Romcode/Switch status/identify/Error result, will G fix it for me too? I have a T95X 1/8 S905X with firmware T5X10008 6.0.1
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Tue Dec 18, 2018 3:23 am
by redacted
carlosadm wrote: ↑Mon Dec 17, 2018 9:51 pm
Mine fails at "Downloading UBOOT" phase, with a [0x10303004] Romcode/Switch status/identify/Error result, will G fix it for me too? I have a T95X 1/8 S905X with firmware T5X10008 6.0.1
seems like it uses an incompatible uboot/ddr.
This can be fixed by replacing atvx's uboot and ddr file with your stock's.
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Tue Dec 18, 2018 10:15 am
by carlosadm
I couldn't find any 7.1 rom that works with my device, so far. Will the 6.01 ones work?
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Sat Dec 29, 2018 8:39 pm
by kick
Hey for those of you who are getting the 98% verify partition error, I was getting the same error. I found an atvx rom for the mxq pro 4k posted by minixfreak on the freaktab forums that worked for me.
The forum link is:
https://forum.freaktab.com/forum/tv-pla ... idtv-7-1-2
The direct mega link that he shared that worked for me (although not sure it's still active) is here:
https://mega.nz/#!jQ8HWIoQ!ubMpueVYGPA_ ... Od6vX91wkw
Hope it works for you too.
Edit:
Just discovered that the remote control doesn't work. I was working with a Rii mini usb keyboard and that works no problem though. If anyone has a fix for the MXQ PRO 4K remote, please let me know.
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Sun Jan 06, 2019 3:38 pm
by eliezerazevedo
kryspus wrote: ↑Mon Dec 17, 2018 12:22 pm
Hi,
I would like to install some of yours atvxperience ROMs. I have tried few versions, included one for s905w (vFF).
But every time i tring to install some of these ROMs, I recive error in USB Burning tools at 98% saying: "partition bootloader/verify partition/error result"
I have found some two different (not atvxperience) roms that worked for me, and i have tried to install atv vF ROM via UPDATE.apk in running box. I've installed TWRP and durring flashing ROM in the middle of progess bar - while "/system" coping i recive some kind of error.
Here is my motherboard TV BOX screen.
My device MXQ Pro 4k s905x(like screen say) p212 (like the third apps say) 1G
https://ibb.co/s9Fmw4Y
I had this same problem! The only possible solution was to install an unofficial version:
https://mega.nz/#!jQ8HWIoQ!ubMpueVYGPA_ ... Od6vX91wkw
I hope the team "atvxperience" creates an official version
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Mon Jan 07, 2019 7:58 am
by kryspus
kick wrote: ↑Sat Dec 29, 2018 8:39 pm
Edit:
Just discovered that the remote control doesn't work. I was working with a Rii mini usb keyboard and that works no problem though. If anyone has a fix for the MXQ PRO 4K remote, please let me know.
I have installed ROM with working remote already. Can i transfer remote setup somehow to make it work in this/any other ROM?
Is the romote controler work proper?
MXQ Pro 4k s905x - 98% verify partition/error result
Posted: Wed Jan 09, 2019 9:53 pm
by eliezerazevedo
kryspus wrote: ↑Mon Jan 07, 2019 7:58 am
kick wrote: ↑Sat Dec 29, 2018 8:39 pm
Edit:
Just discovered that the remote control doesn't work. I was working with a Rii mini usb keyboard and that works no problem though. If anyone has a fix for the MXQ PRO 4K remote, please let me know.
I have installed ROM with working remote already. Can i transfer remote setup somehow to make it work in this/any other ROM?
Is the romote controler work proper?
kryspus wrote: ↑Mon Jan 07, 2019 7:58 am
kick wrote: ↑Sat Dec 29, 2018 8:39 pm
Edit:
Just discovered that the remote control doesn't work. I was working with a Rii mini usb keyboard and that works no problem though. If anyone has a fix for the MXQ PRO 4K remote, please let me know.
I have installed ROM with working remote already. Can i transfer remote setup somehow to make it work in this/any other ROM?
Is the romote controler work proper?
Native remote control not fiction
I have a Wireless Remote that worked fine! model:
https://http2.mlstatic.com/mini-key-key ... 018-O.webp
