Porting Wi-Fi from stock ROM to atvX

[Nayam]

Thanks, so it does not matter wether AP62xx or RT8xxx? Beside this I experienced some better performance on different roms, maybe due to tweaks in General no matter which chip is used? Could be just a feeling...

I equipped the tx92 with external antenna connector and I had better connection then with attached WiFi antenna.

What about the internal PCB antenna. Does replacing with internal 8dbi PCB antenna make sense?

Antenna should help in some way.
I ripped my h96's off and it stopped receiving signals, now the wire attached to the antenna must be in perfect position to catch signals or else only the closest AP appears.
BUT, I'm not sure if replacing antenna with your own is feasible or not

[apricot007]

I have been trying to compile 8812au.ko to work correctly with my device ID (0bda:0811). I can insmod the existing driver file but it does not recognize my device.

I have found new driver source here: https://github.com/gnab/rtl8812au
But I do not know how to find the kernel source and compile it myself. Is there anyone who can help me compile it?

Internal wifi makes this rom unusable for me. I have a FayTun USB adapter, and it works out of the box on CoreELEC.

[TsutomuSakai]

Have you already used these sources? Does everything work correctly?

[soldiaz]

Back to wifi performance: I experienced a real wifi boost using MINIXFREAK OS...awesome!

[oblus]

Ok and how to copy wifi drivers in oposite way: from atvX to stock?

[khoudou]

h96 PRO H3 wifi and bluetooth not working i changed this files with amlogic flash tool V6 but wifi not working

[em3ka]

...I just download the Ricky's Tool v6.0 [earlier tried with v4.0 but it couldn't extract till the required folder] and changed the files as below and that turned my WiFi ON!!

Copied Files from Stock Rom to ATVx ROM (as per the WiFi porting guide by [mention]Nayam[/mention] )

1)Replaced all bin files
\level2\system\bin

2)Replaced all wifi files
\level2\system\etc\wifi

3)Replaced dhcpcd folder
level2\system\etc\dhcpcd

4)Replaced lib folder all files
level2\system\lib

Cleared cache through recovery on first boot.

And the good thing is that along with WiFI, my LED display was also working fine as on stock and It didn't required any patch file to be flashed...

[chancat]

Can the Bluetooth driver files be extracted? In what directory?

[em3ka]

Can the Bluetooth driver files be extracted? In what directory?

Under PIE firmware from:
vendor/etc/bluetooth/*.* - all files
vendor/etc/wifi/*.* - files relevant for chip used
vendor/firmware/*.* - files for RTL chip, if used
vendor/lib/*.*
vendor/lib/modules/*.* - files relevant for chip used

[soldiaz]

wifi under PIE same as mentioned?