[HELP] X96mini q6x v2.2 17355 bricked

TX3 Mini, X96 Mini, W95 to name a few...
soldiaz
Expert Member
Posts: 404
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 28 times
Been thanked: 22 times

#31

possible, so we must know what procedure does and if it was possible to flash locked bootloader through it
kokito0
Verified Member
Posts: 22
Joined: Wed Mar 24, 2021 9:14 am
Been thanked: 5 times

#32

I first formatted nand and used HDD Raw Copy Tool 1.10 to copy the dump firmware (original firmware from box) to nand
kokito0
Verified Member
Posts: 22
Joined: Wed Mar 24, 2021 9:14 am
Been thanked: 5 times

#33

Need 4 pin wire solder to sdcard box >> d0,clk,cmd and ground
In motherboard need plugin power and short pin crystal to ground and then connected sdcard box to laptop sdcard reader
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#34

kokito0 wrote: Sat Apr 17, 2021 12:05 pm ...need plugin power and short pin crystal to ground...
Can you mark (d0,clk,cmd and ground) where each wire goes on PCB ?
nand_hack_pins.png
You do not have the required permissions to view the files attached to this post.
User avatar
qontol
Posts: 7
Joined: Sat Oct 24, 2020 6:39 am

#35

Hi @kokito0 , i need this to if you don't mind
em3ka wrote: Sat Apr 17, 2021 2:20 pm Can you mark (d0,clk,cmd and ground) where each wire goes on PCB ?
also do you using the dump firmware from this post ?
didux wrote: Thu Mar 25, 2021 3:21 am [mention]kokito0[/mention] https://drive.google.com/u/0/uc?id=1nqQ ... t=download
User avatar
qontol
Posts: 7
Joined: Sat Oct 24, 2020 6:39 am

#36

kokito0 wrote: Sat Apr 17, 2021 12:05 pm connected sdcard box to laptop sdcard reader
so it was sdcard reader ? i though it was USB plug
User avatar
qontol
Posts: 7
Joined: Sat Oct 24, 2020 6:39 am

#37

Captured and attached hi res photo for marking
20210418_131207.jpg
20210418_131224.jpg
You do not have the required permissions to view the files attached to this post.
kokito0
Verified Member
Posts: 22
Joined: Wed Mar 24, 2021 9:14 am
Been thanked: 5 times

#38

qontol wrote: Sun Apr 18, 2021 5:43 am Hi @kokito0 , i need this to if you don't mind
em3ka wrote: Sat Apr 17, 2021 2:20 pm Can you mark (d0,clk,cmd and ground) where each wire goes on PCB ?
also do you using the dump firmware from this post ?
didux wrote: Thu Mar 25, 2021 3:21 am [mention]kokito0[/mention] https://drive.google.com/u/0/uc?id=1nqQ ... t=download
no this is twrp dump
this is original dump ==> https://mega.nz/file/PsUjGYgK#nBfJ5_EE9 ... rR9i82MZiA
kokito0
Verified Member
Posts: 22
Joined: Wed Mar 24, 2021 9:14 am
Been thanked: 5 times

#39

photos
You do not have the required permissions to view the files attached to this post.
kokito0
Verified Member
Posts: 22
Joined: Wed Mar 24, 2021 9:14 am
Been thanked: 5 times

#40

D0 > Data0
CLK > CLK
CMD > CMD
Ground (ground from usb port) > short capacitor (i uploaded photo where) to ground.
You do not have the required permissions to view the files attached to this post.
Post Reply