atvXperience : The Forum

[mention]didux[/mention] so i can't to unbrick this box......

kokito0 wrote: ↑Thu Mar 25, 2021 1:32 pm [mention]didux[/mention] so i can't to unbrick this box......

Some russians were successful in unbricking their boxes, so it must be described in the instruction file inside the archive. If it does not work for you, contact the manufacturer for further help/support...

didux wrote: ↑Thu Mar 25, 2021 1:47 pm

kokito0 wrote: ↑Thu Mar 25, 2021 1:32 pm [mention]didux[/mention] so i can't to unbrick this box......

Some russians were successful in unbricking their boxes, so it must be described in the instruction file inside the archive. If it does not work for you, contact the manufacturer for further help/support...

i try the with sd card and usb flash (russians variant) but i can't to entered in recovery mode... just need me stock firmware img format

I unbrick the box with this very hard method....

kokito0 wrote: ↑Mon Mar 29, 2021 9:58 am I unbrick the box with this very hard method....

I'm glad it worked. Many users would be happy to receive instructions in English

kokito0 wrote: ↑Mon Mar 29, 2021 9:58 am I unbrick the box with this very hard method....

Hi @kokito0 , can i have short explanation about this ? or the wire pins ?

Would be nice....v2.2 is locked bootloader isnt it?


Solution posted on 4PDA:

Yes, I have a cable from the board to the SD card box soldered and it connects to the computer to connect CLK, CMD, Data0 and ground.



modEDIT:
32 GB EMMC Memory Micro SD card Connection [Electronics Projects]

the procedure is long and requires a microscope, soldering iron and special software.

kokito0 wrote: ↑Thu Apr 15, 2021 3:17 pm the procedure is long and requires a microscope, soldering iron and special software.

what is the name of windows software that you are using ?

i have one with unlocked bootloader ( currently installed atvxperience on emmc and armbian on sdcard ), i bricked it and debricked couple times without problems,
then i recently buy another one that already bricked ( because of lower price and my previous experience with debricking ), i noticed that this hardware is different with my previous one, as i read from internet the bootloader is locked, and my firmware that works on my previous previous hardware is not working on this hardware

i was thinking to use the one as media server (armbian) and another one as media player (android), so i'm doing it for myself, not for any profit.

soldiaz wrote: ↑Thu Apr 15, 2021 2:49 pm Would be nice....v2.2 is locked bootloader isnt it?

i have 2 devices, both have "Q6X V2.2 17355" in the board, the difference that i see is in the square component ( maybe IC or chipset, i'm not really know what is it and i'm not really a tech guy ) the one i can debrick just with UBT and not with the another one, so i guest the locked bootloader is not on a specific board version, maybe on a specific component