Hi, when I factory reset I get stuck in the start up atvx logo. I pull power and power up and it starts normally. I've tried to hold in reset button after starting up, to get into recovery mode but nothing happens.
So I thought I'd try a different firmware but sd card version just loads a android with a red x next to it and USB burning tool version, it just gets stuck on the start up atvx logo.
The box is a Tanix 8 Max, s912 Amlogic box
[HELP] Stuck on atvX logo
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Proceed as usual with burning tool, instead of holding reset button, open terminal app and execute commandamogotflow wrote: ↑Sun Apr 18, 2021 10:47 pm ...to hold in reset button after starting up, to get into recovery mode but nothing happens ..... and USB burning tool version, it just gets stuck on the start up atvx logo...
Code: Select all
reboot update
-
- Posts: 6
- Joined: Tue Sep 11, 2018 11:03 pm
- Been thanked: 1 time
Thanks for the reply.em3ka wrote: ↑Mon Apr 19, 2021 6:52 amProceed as usual with burning tool, instead of holding reset button, open terminal app and execute commandamogotflow wrote: ↑Sun Apr 18, 2021 10:47 pm ...to hold in reset button after starting up, to get into recovery mode but nothing happens ..... and USB burning tool version, it just gets stuck on the start up atvx logo...https://www.youtube.com/watch?v=t4xTYCgwirgCode: Select all
reboot update
I have tried the video tutorial but still stuck in atvexperience logo no matter what I do, I have tried 3 different cables as well.
Also when I try and factory reset or get into recovery mode I get stuck on atvexperience start up logo.
Any ideas?
EDIT: Can you give a step by step on how to do it with the terminal? Ive connected to the device via adb and when i write reboot update it says reboot is unrecognized.
Thanks in advance
-
- Posts: 6
- Joined: Tue Sep 11, 2018 11:03 pm
- Been thanked: 1 time
Maybe giving some more info will help
I connected to the device via adb shell
1. I open USB burning tool, load the image and click start
2. I insert power cable and then usb cable into the box
3. I write adb reboot update
The box reboots but is stil stuck on the atvexperience start up logo and nothing happens in USB burning tool.
-
- Posts: 6
- Joined: Tue Sep 11, 2018 11:03 pm
- Been thanked: 1 time
This is the fw I'm trying to install https://forum.xda-developers.com/t/v4-s ... s.4199287/
But problem is USB burning tool can't detect my device, probably because when I do the pin, power cable, USB steps, the box never goes beyond the atvexperience boot up logo.
Also I tried to use Atvexperience ota app and chose the file from sd card, it restarts the device but once again it's stuck in atvexperience boot logo.
Back in the day when I upgraded to atvexperience from stock firmware and that worked but now I'm stuck here.
EDIT: Would also be helpful if I could just reset the box, when I try to reset the box it restarts but is stuck on atvexperience logo, I take out power cable and reinsert it and it boots up normally but without being reset.
EDIT 2: So I have now been able to detect the device in USB burning tool. I have tried to install all 3 different firmwares for S912 slow devices options and each time i get the same error.
EDIT 3: I get the same error when I try to flash atvexperience firmware for S912, basically the same firmware which is already on the box
EDIT 4: So I unchecked erase flash/bootloader and was able to successfully the firmware, but when I try to turn it on the box is unresponsive also it no longer turns up in USB burning tools, have I bricked it?
This is the log from USB burning tool
Code: Select all
[14:37:59 322][Global][Inf]--User click start button
[14:37:59 322][Global][Inf]--SetErase
[14:37:59 322][Global][Inf]--Enable burning 1
[14:37:59 324][Global][Inf]--Scan usb device
[14:37:59 324][Global][Inf]--Aml scan WorldCup Device
[14:37:59 325][Global][Inf]--Host: USB xHCI Compliant Host Controller
[14:37:59 325][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_86941043&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:37:59 325][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2de2dda7&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 325][Global][Inf]-------->[Port0]Other device
[14:37:59 326][Global][Inf]-------->[Port1]Other device
[14:37:59 326][Global][Inf]-------->[Port2]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 326][Global][Inf]---------->[Port0]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port1]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port2]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port3]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port4]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port5]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port6]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port7]Other device
[14:37:59 326][Global][Inf]-------->[Port8]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port9]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port10]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port11]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port12]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port13]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port14]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port15]USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 326][Global][Inf]---------->[Port0]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port1]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port2]NoDeviceConnected
[14:37:59 326][Global][Inf]---------->[Port3]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port16]NoDeviceConnected
[14:37:59 326][Global][Inf]-------->[Port17]NoDeviceConnected
[14:37:59 327][Global][Inf]--Host: ASMedia USB3.1 eXtensible Host Controller
[14:37:59 327][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&d543b65&0&00e2#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:37:59 327][Global][Inf]---->Roothub:USB#ASMEDIAROOT_Hub#5&1a2dc792&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 327][Global][Inf]-------->[Port0]NoDeviceConnected
[14:37:59 327][Global][Inf]-------->[Port1]NoDeviceConnected
[14:37:59 327][Global][Inf]-------->[Port2]NoDeviceConnected
[14:37:59 327][Global][Inf]-------->[Port3]NoDeviceConnected
[14:37:59 327][Global][Inf]--Scan USB host controller complete
[14:37:59 327][Global][Inf]--Update data center with HubMap
[14:37:59 327][Global][Inf]--Update hub1 device data
[14:37:59 327][Global][Inf]--Update HUB1-1
[14:37:59 327][HUB1-1][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-2
[14:37:59 327][HUB1-2][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-3
[14:37:59 327][HUB1-3][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-4 \\.\USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 327][HUB1-4][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-5
[14:37:59 327][HUB1-5][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-6
[14:37:59 327][HUB1-6][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-7
[14:37:59 327][HUB1-7][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-8
[14:37:59 327][HUB1-8][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-9
[14:37:59 327][HUB1-9][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-10
[14:37:59 327][HUB1-10][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-11
[14:37:59 327][HUB1-11][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-12
[14:37:59 327][HUB1-12][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-13
[14:37:59 327][HUB1-13][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-14
[14:37:59 327][HUB1-14][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-15
[14:37:59 327][HUB1-15][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-16 \\.\USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:37:59 327][HUB1-16][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-17
[14:37:59 327][HUB1-17][Inf]--Update device path
[14:37:59 327][Global][Inf]--Update HUB1-18
[14:37:59 327][HUB1-18][Inf]--Update device path
[14:37:59 327][Global][Inf]--Scan end
[14:38:19 343][Global][Inf]--Catch DBT_DEVICEARRIVAL
[14:38:19 343][Global][Inf]--Scan usb device
[14:38:19 343][Global][Inf]--Aml scan WorldCup Device
[14:38:19 343][Global][Inf]--Host: USB xHCI Compliant Host Controller
[14:38:19 343][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_86941043&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:19 343][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2de2dda7&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][Global][Inf]-------->[Port0]Other device
[14:38:19 343][Global][Inf]-------->[Port1]Other device
[14:38:19 343][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:38:19 343][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port4]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port5]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port6]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port7]Other device
[14:38:19 343][Global][Inf]-------->[Port8]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port9]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port10]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port11]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port12]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port13]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port14]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port15]USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:19 343][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port16]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port17]NoDeviceConnected
[14:38:19 343][Global][Inf]--Host: ASMedia USB3.1 eXtensible Host Controller
[14:38:19 343][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&d543b65&0&00e2#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:19 343][Global][Inf]---->Roothub:USB#ASMEDIAROOT_Hub#5&1a2dc792&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][Global][Inf]-------->[Port0]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port1]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:19 343][Global][Inf]-------->[Port3]NoDeviceConnected
[14:38:19 343][Global][Inf]--Scan USB host controller complete
[14:38:19 343][Global][Inf]--Update data center with HubMap
[14:38:19 343][Global][Inf]--Update hub1 device data
[14:38:19 343][Global][Inf]--Update HUB1-1
[14:38:19 343][HUB1-1][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-2
[14:38:19 343][HUB1-2][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-3 \\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:38:19 343][HUB1-3][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-4 \\.\USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][HUB1-4][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-5
[14:38:19 343][HUB1-5][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-6
[14:38:19 343][HUB1-6][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-7
[14:38:19 343][HUB1-7][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-8
[14:38:19 343][HUB1-8][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-9
[14:38:19 343][HUB1-9][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-10
[14:38:19 343][HUB1-10][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-11
[14:38:19 343][HUB1-11][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-12
[14:38:19 343][HUB1-12][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-13
[14:38:19 343][HUB1-13][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-14
[14:38:19 343][HUB1-14][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-15
[14:38:19 343][HUB1-15][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-16 \\.\USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:19 343][HUB1-16][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-17
[14:38:19 343][HUB1-17][Inf]--Update device path
[14:38:19 343][Global][Inf]--Update HUB1-18
[14:38:19 343][HUB1-18][Inf]--Update device path
[14:38:19 343][Global][Inf]--Scan end
[14:38:19 390][Global][Inf]--Burning thread HUB1-3 start
[14:38:19 453][HUB1-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x0000088c
[14:38:19 515][HUB1-3][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P2
[14:38:19 515][HUB1-3][Inf]--Start burning...
[14:38:19 578][HUB1-3][Inf]--------------ERASE BOOTLOADER------------
[14:38:19 687][HUB1-3][Inf]--start SendIdentifyCmd
[14:38:19 687][HUB1-3][Inf]--0-7-0-16
[14:38:19 687][HUB1-3][Inf]--Identify status success
[14:38:19 687][HUB1-3][Inf]-- low_power
[14:38:19 687][HUB1-3][Inf]--Low power command success
[14:38:19 687][HUB1-3][Inf]--Read low power success
[14:38:19 687][HUB1-3][Inf]--bootloader_is_old
[14:38:19 687][HUB1-3][Inf]--Bootloader command success
[14:38:19 687][HUB1-3][Inf]--Bootloader is old
[14:38:19 687][HUB1-3][Inf]--erase_bootloader
[14:38:19 687][HUB1-3][Inf]--Erase command success
[14:38:19 703][HUB1-3][Inf]--Read erase status success
[14:38:19 703][HUB1-3][Inf]--reset
[14:38:19 703][HUB1-3][Inf]--reset command success
[14:38:20 702][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[14:38:20 718][Global][Inf]--Scan usb device
[14:38:20 718][Global][Inf]--Aml scan WorldCup Device
[14:38:20 718][Global][Inf]--Host: USB xHCI Compliant Host Controller
[14:38:20 718][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_86941043&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:20 718][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2de2dda7&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][Global][Inf]-------->[Port0]Other device
[14:38:20 718][Global][Inf]-------->[Port1]Other device
[14:38:20 718][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port4]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port5]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port6]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port7]Other device
[14:38:20 718][Global][Inf]-------->[Port8]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port9]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port10]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port11]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port12]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port13]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port14]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port15]USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:20 718][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port16]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port17]NoDeviceConnected
[14:38:20 718][Global][Inf]--Host: ASMedia USB3.1 eXtensible Host Controller
[14:38:20 718][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&d543b65&0&00e2#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:20 718][Global][Inf]---->Roothub:USB#ASMEDIAROOT_Hub#5&1a2dc792&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][Global][Inf]-------->[Port0]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port1]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:20 718][Global][Inf]-------->[Port3]NoDeviceConnected
[14:38:20 718][Global][Inf]--Scan USB host controller complete
[14:38:20 718][Global][Inf]--Update data center with HubMap
[14:38:20 718][Global][Inf]--Update hub1 device data
[14:38:20 718][Global][Inf]--Update HUB1-1
[14:38:20 718][HUB1-1][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-2
[14:38:20 718][HUB1-2][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-3
[14:38:20 718][HUB1-3][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-4 \\.\USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][HUB1-4][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-5
[14:38:20 718][HUB1-5][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-6
[14:38:20 718][HUB1-6][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-7
[14:38:20 718][HUB1-7][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-8
[14:38:20 718][HUB1-8][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-9
[14:38:20 718][HUB1-9][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-10
[14:38:20 718][HUB1-10][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-11
[14:38:20 718][HUB1-11][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-12
[14:38:20 718][HUB1-12][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-13
[14:38:20 718][HUB1-13][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-14
[14:38:20 718][HUB1-14][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-15
[14:38:20 718][HUB1-15][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-16 \\.\USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:20 718][HUB1-16][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-17
[14:38:20 718][HUB1-17][Inf]--Update device path
[14:38:20 718][Global][Inf]--Update HUB1-18
[14:38:20 718][HUB1-18][Inf]--Update device path
[14:38:20 718][Global][Inf]--Scan end
[14:38:20 765][HUB1-3][Inf]--Device is removed
[14:38:22 073][Global][Inf]--Catch DBT_DEVICEARRIVAL
[14:38:22 073][Global][Inf]--Scan usb device
[14:38:22 073][Global][Inf]--Aml scan WorldCup Device
[14:38:22 073][Global][Inf]--Host: USB xHCI Compliant Host Controller
[14:38:22 073][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_86941043&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:22 073][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2de2dda7&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][Global][Inf]-------->[Port0]Other device
[14:38:22 073][Global][Inf]-------->[Port1]Other device
[14:38:22 073][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:38:22 073][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port4]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port5]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port6]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port7]Other device
[14:38:22 073][Global][Inf]-------->[Port8]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port9]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port10]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port11]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port12]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port13]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port14]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port15]USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:22 073][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port16]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port17]NoDeviceConnected
[14:38:22 073][Global][Inf]--Host: ASMedia USB3.1 eXtensible Host Controller
[14:38:22 073][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&d543b65&0&00e2#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:22 073][Global][Inf]---->Roothub:USB#ASMEDIAROOT_Hub#5&1a2dc792&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][Global][Inf]-------->[Port0]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port1]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:22 073][Global][Inf]-------->[Port3]NoDeviceConnected
[14:38:22 073][Global][Inf]--Scan USB host controller complete
[14:38:22 073][Global][Inf]--Update data center with HubMap
[14:38:22 073][Global][Inf]--Update hub1 device data
[14:38:22 073][Global][Inf]--Update HUB1-1
[14:38:22 073][HUB1-1][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-2
[14:38:22 073][HUB1-2][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-3 \\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[14:38:22 073][HUB1-3][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-4 \\.\USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][HUB1-4][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-5
[14:38:22 073][HUB1-5][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-6
[14:38:22 073][HUB1-6][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-7
[14:38:22 073][HUB1-7][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-8
[14:38:22 073][HUB1-8][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-9
[14:38:22 073][HUB1-9][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-10
[14:38:22 073][HUB1-10][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-11
[14:38:22 073][HUB1-11][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-12
[14:38:22 073][HUB1-12][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-13
[14:38:22 073][HUB1-13][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-14
[14:38:22 073][HUB1-14][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-15
[14:38:22 073][HUB1-15][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-16 \\.\USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:22 073][HUB1-16][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-17
[14:38:22 073][HUB1-17][Inf]--Update device path
[14:38:22 073][Global][Inf]--Update HUB1-18
[14:38:22 073][HUB1-18][Inf]--Update device path
[14:38:22 073][Global][Inf]--Scan end
[14:38:22 120][HUB1-3][Inf]--Device is connected
[14:38:22 120][HUB1-3][Inf]--Close device handle 0x0000088c
[14:38:22 183][HUB1-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&2f73257&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000a94
[14:38:25 253][HUB1-3][Inf]-------------Download DDR.USB-----------
[14:38:25 253][HUB1-3][Inf]--2-2-0-0
[14:38:25 253][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:38:25 764][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:38:26 276][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[14:38:26 790][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[14:38:27 304][HUB1-3][Inf]--Write initial succeed
[14:38:27 304][HUB1-3][Inf]--Upload encrypt at 0xc8100228
[14:38:27 304][HUB1-3][Inf]--ulValue = 0xadfc318c
[14:38:27 304][HUB1-3][Inf]--Read encrypt value succeed
[14:38:27 304][HUB1-3][Inf]--Download DDR.USB,size: 49152!
[14:38:27 312][HUB1-3][Inf]--Transfer complete 49152
[14:38:27 313][HUB1-3][Inf]--Run at address 0xd9000000
[14:38:27 313][HUB1-3][Inf]--RunInRam success
[14:38:27 335][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[14:38:27 335][HUB1-3][Inf]--CheckFileRunState return 8
[14:38:27 335][HUB1-3][Inf]--Run at address 0xd900c000
[14:38:27 336][HUB1-3][Inf]--RunInRam succeed
[14:38:27 662][HUB1-3][Err]--ReadLargeMemCMD failed ret = -5
[14:38:27 662][HUB1-3][Err]--ReadPara failed
[14:38:27 672][HUB1-3][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[14:38:27 672][HUB1-3][Inf]--Close device handle 0x00000a94
[14:38:27 681][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[14:38:27 682][Global][Inf]--Scan usb device
[14:38:27 682][Global][Inf]--Aml scan WorldCup Device
[14:38:27 683][Global][Inf]--Host: USB xHCI Compliant Host Controller
[14:38:27 683][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9d2f&subsys_86941043&rev_21#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:27 683][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2de2dda7&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 684][Global][Inf]-------->[Port0]Other device
[14:38:27 684][Global][Inf]-------->[Port1]Other device
[14:38:27 684][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:27 684][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 684][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:27 685][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:27 685][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:27 685][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port4]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port5]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port6]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port7]Other device
[14:38:27 685][Global][Inf]-------->[Port8]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port9]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port10]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port11]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port12]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port13]NoDeviceConnected
[14:38:27 685][Global][Inf]-------->[Port14]NoDeviceConnected
[14:38:27 686][Global][Inf]-------->[Port15]USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 686][Global][Inf]---------->[Port0]NoDeviceConnected
[14:38:27 686][Global][Inf]---------->[Port1]NoDeviceConnected
[14:38:27 686][Global][Inf]---------->[Port2]NoDeviceConnected
[14:38:27 686][Global][Inf]---------->[Port3]NoDeviceConnected
[14:38:27 686][Global][Inf]-------->[Port16]NoDeviceConnected
[14:38:27 686][Global][Inf]-------->[Port17]NoDeviceConnected
[14:38:27 686][Global][Inf]--Host: ASMedia USB3.1 eXtensible Host Controller
[14:38:27 686][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&d543b65&0&00e2#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[14:38:27 687][Global][Inf]---->Roothub:USB#ASMEDIAROOT_Hub#5&1a2dc792&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 687][Global][Inf]-------->[Port0]NoDeviceConnected
[14:38:27 687][Global][Inf]-------->[Port1]NoDeviceConnected
[14:38:27 687][Global][Inf]-------->[Port2]NoDeviceConnected
[14:38:27 687][Global][Inf]-------->[Port3]NoDeviceConnected
[14:38:27 687][Global][Inf]--Scan USB host controller complete
[14:38:27 687][Global][Inf]--Update data center with HubMap
[14:38:27 687][Global][Inf]--Update hub1 device data
[14:38:27 687][Global][Inf]--Update HUB1-1
[14:38:27 687][HUB1-1][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-2
[14:38:27 687][HUB1-2][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-3
[14:38:27 687][HUB1-3][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-4 \\.\USB#VID_05E3&PID_0610#5&2f73257&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 687][HUB1-4][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-5
[14:38:27 687][HUB1-5][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-6
[14:38:27 687][HUB1-6][Inf]--Update device path
[14:38:27 687][Global][Inf]--Update HUB1-7
[14:38:27 687][HUB1-7][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-8
[14:38:27 688][HUB1-8][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-9
[14:38:27 688][HUB1-9][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-10
[14:38:27 688][HUB1-10][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-11
[14:38:27 688][HUB1-11][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-12
[14:38:27 688][HUB1-12][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-13
[14:38:27 688][HUB1-13][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-14
[14:38:27 688][HUB1-14][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-15
[14:38:27 688][HUB1-15][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-16 \\.\USB#VID_05E3&PID_0612#5&2f73257&0&16#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[14:38:27 688][HUB1-16][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-17
[14:38:27 688][HUB1-17][Inf]--Update device path
[14:38:27 688][Global][Inf]--Update HUB1-18
[14:38:27 688][HUB1-18][Inf]--Update device path
[14:38:27 688][Global][Inf]--Scan end
[14:38:31 970][Global][War]--User click stop button
[14:38:31 971][Global][Inf]--Enable burning 0
-
- Posts: 6
- Joined: Tue Sep 11, 2018 11:03 pm
- Been thanked: 1 time
Update:
I was able to unbrick my box using the pin method, took a bit to figure out which pins but in the end got it working. Now I have a beta version of the stock rom installed which doesn't work properly. Im considering once again installing atvx fw on it, but not sure which version to try out and see if I can even install it.
Ive attached a picture of the board, maybe someone can point me in the right direction.
Download link is https://mega.nz/folder/GEpQmQhZ#ezNEXQd ... r/qF4gxQLJ
EDIT: Link to image
https://k00.fr/x4kbiu9t
I was able to unbrick my box using the pin method, took a bit to figure out which pins but in the end got it working. Now I have a beta version of the stock rom installed which doesn't work properly. Im considering once again installing atvx fw on it, but not sure which version to try out and see if I can even install it.
Ive attached a picture of the board, maybe someone can point me in the right direction.
Download link is https://mega.nz/folder/GEpQmQhZ#ezNEXQd ... r/qF4gxQLJ
EDIT: Link to image
https://k00.fr/x4kbiu9t
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
viewtopic.php?t=1932#p11877amogotflow wrote: ↑Mon Apr 19, 2021 9:11 pm I was able to unbrick my box using the pin method ..... Im considering once again installing atvx fw on it, but not sure which version to try out...