[Discussion] H96 Pro+ ~Pros, cons, and tips

[ricklar]

[mention]madpooper1234[/mention] I had an issue with my box freezing up coming off idle directly into a modified app, the issue had to do with Google Services or Ad Services and only happened with that one app, which I also set a hot key on remote for it with ButtonMapper program so as you can imagine i use it a lot, but once I patched the app with LuckyPatcher no more crashes to the box or on that one app.

Also, V2H doesn't have any of the Build.prop tweaks previously install in previous versions. Some of which include streaming tweaks and video tweaks. I posted previously a Work-In-Progress modified build.prop for the H96 in this forum a few months back. It is not universal for all devices but if you have 3GB/32GB it should work(do not install directly install in 2GB device, it will crash it). Best solution until I update that file with my current config is to copy/paste the "tweaks" only into your build.prop file and make sure the permissions stay rw- r-- r--. If you want to copy file and edit on a PC make sure you use Notepad++ on Windows to not lose Unix formatting or just use a Linux based system.

Will try to update my build.prop with current config within next two days.

[Maikl]

ricklar
Oreo for H96 Pro + when planned?

[ricklar]

ricklar
Oreo for H96 Pro + when planned?

Work has been started on S912 chip Oreo build, modified kernel and bootloader to get Oreo to boot, though it is still not yet stable. No planned release date yet. First priority for Devs is they must finish S905X and S905W firmwares for the latest V3 of atvXperience.

[lost2]

The LPDDR3 and DDR4 versions are now ready to download again.
Please note - These builds include new Bootloaders that have been patched and recompiled specifically for LPDDR3 and DDR4 devices.

i use your rom LPddr3 , i have some video drops with Kodi , its your rom has the Video improvement patches that antonio6o6 has on his roms?. Thanks anyway for your work

[bumerc]

The LPDDR3 and DDR4 versions are now ready to download again.
Please note - These builds include new Bootloaders that have been patched and recompiled specifically for LPDDR3 and DDR4 devices.

i use your rom LPddr3 , i have some video drops with Kodi , its your rom has the Video improvement patches that antonio6o6 has on his roms?. Thanks anyway for your work

As I have already said, I have not been involved in the development of this ROM, and as far as I know, this is no longer being developed

[dankell]

Hi everyone,

Did someone tried to install this one :

lpddr3_v2h

on a H96 Pro + 3/32 Blue PCB LPDDR3 ?

I'm a bit noob. Not really sure about trying this without garantees. Sad, i know...

Thx for your help guys,

This build was tested on my H96Pro + with blue PCB and works fine, otherwise I would write a little warning about it.

I have been reading this thread mate and am still unsure which build is best for my Motherboard box.
My box is a h96 pro + 3 G ram 32 Memory
I have the Blue PCB version board with the LPDDR3 S32-V6 and wifi 9377

Please can you tell me if this is compatible with my board ? I just need to be 100% before I mess something up.
I am thinking this image lpddr3_v2h ? But still want 100% confirmation that this is indeed the latest image for my PCB version board.

Thank you for any help or support .

Best Regards,

[em3ka]

... am thinking this image lpddr3_v2h ? ...

viewtopic.php?p=5092#p5092

[dankell]

... am thinking this image lpddr3_v2h ? ...

viewtopic.php?p=5092#p5092

Thank for your help ...But I have already been there and seen this post...
The LP3DDR takes me to 2 files.
atvXperience_S912_LPDDR3_V2H.img
atvXperience_s912_lpddr3_test_v2g.img

So this was the very reason I asked for some clarification.
The link shows 2 files ..So I will ask the question again ...which is the correct version for my Box ?
What is the atvXperience_s912_lpddr3_test_v2g.img ? used for.

Thanks for any further help or advice.

Best Regards,

[ricklar]

... am thinking this image lpddr3_v2h ? ...

viewtopic.php?p=5092#p5092

Thank for your help ...But I have already been there and seen this post...
The LP3DDR takes me to 2 files.
atvXperience_S912_LPDDR3_V2H.img
atvXperience_s912_lpddr3_test_v2g.img
So this was the very reason I asked for some clarification.
The link shows 2 files ..So I will ask the question again ...which is the correct version for my Box ?
What is the atvXperience_s912_lpddr3_test_v2g.img ? used for.
Thanks for any further help or advice.
Best Regards,

Use the V2H.

v2G has problems why is classified as test.

[dankell]

@ricklar Thank you Sir for the clarification.

I have read through this thread and many more similar posts Mate. sorry if I am repeating any obvious questions asked and answered .....But I am sure while reading and sifting through the posts , I read that this image needed some patches too ? .. Could you please highlight which patches I will actually need .?
example: Do I need the Bluetooth or WI-FI patch ( QC9377_BT_Fix) or game control patches , more settings Patch with this version also for my LPDDR3 revision Board PCB ? or have they been integrated within this image. (atvXperience_S912_LPDDR3_V2H.img)

Thank you for taking your time to help and support , Sir ...I really appreciate your feedback.

Best Regards,