flash the image file via usb amlogic
burn
[Discussion] H96 Pro+ ~Pros, cons, and tips
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Thanks, will test it within 24hrs. Cheersbumerc wrote: ↑Sun Jan 06, 2019 4:18 pm [mention]ricklar[/mention] [mention]craser86[/mention]
The DDR4 issue is fixed, it should be 3g available.
>>Download<<
Installation via ABT or SDcard
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
If you open the casing of the box, unscrew mounting screws, and look at top of PCB near the CPU is the ram chips and printed on the board or on the ram chips is writing of which ram type you have.
That is ok, normal, AtvX is coded to run in 32-bit mode.craser86 wrote: ...also saw that the architecture is 32bit not 64bit...
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Verified Member
- Posts: 28
- Joined: Sat Jan 05, 2019 1:57 pm
I installed the fix for ram ddr4 via amlogic burn usb. the box starts but remains implanted with a black screen. currently I have installed v2g s912 which only shows 2gb ram. system sounds do not work, the cec-hdmi does not work. I saw that my TV now shows 12bit 420yup 4k, normal has always shown 10bit. I hope in a series of fixes. now I see how it works SPMC.
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
[mention]bumerc[/mention] tested your mod, the firmware would not boot up, stuck on black screen.bumerc wrote: ↑Sun Jan 06, 2019 4:18 pm [mention]ricklar[/mention] [mention]craser86[/mention]
The DDR4 issue is fixed, it should be 3g available.
>>Download<<
Installation via ABT or SDcard
In Amlogic USB Burn Tool the right side has box that says Key: (blank) ~Available: (blank)
If I load the stock firmware i got from freaktab.com, don't have the original. That Tool says Key: mac ~Available: 291
So reloaded you v2G firmware mod with second time choosing Overwrite Key -Configuration check box. And box still does not boot.
Question is that Key important? Something that needs to be added to AtvX firmware?
[mention]craser86[/mention] my box says the same S32-V3(DDR4) on a Green board, just not printed is the CZ.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
You are using v2FF ?
It is OK for the box to show s905x in AIDA64, that is just a build.prop line code Edit that can easily be changed.
Nayam released the final V2G ROM, if you want to test that out:
https://www.atvxperience.com/download/a ... pdmdl=7501
I have not yet tested those, I believe I found the problem within v2FF that was causing me to have streaming issues, need to test further before I try loading v2G.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!