Beelink W95 remote Tab file

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
Techflame
Posts: 6
Joined: Tue Sep 10, 2019 9:57 am
Has thanked: 4 times
Been thanked: 2 times

#1

Hello! could you guys share the .TAB file for my remote? it is this one
You do not have the required permissions to view the files attached to this post.
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#2

Post remote.conf file from stock firmware.
Techflame
Posts: 6
Joined: Tue Sep 10, 2019 9:57 am
Has thanked: 4 times
Been thanked: 2 times

#3

here it is. I found it by extracting the stock firmware, thank you very much for helping me
You do not have the required permissions to view the files attached to this post.
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#4

Beelink_white_remote.zip
You do not have the required permissions to view the files attached to this post.
Techflame
Posts: 6
Joined: Tue Sep 10, 2019 9:57 am
Has thanked: 4 times
Been thanked: 2 times

#5

thank you, i put the file in the correct folder with the correct permission (rw-r-r) but surprisingly it doesn't work, that's weird :slight_frown: i used root explorer to do it
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#6

Techflame wrote: Fri Jun 18, 2021 6:51 am ...surprisingly it doesn't work, that's weird...
Help me out with this
- open Terminal Emulator from appdrawer
- you need to type in dmesg and press ENTER (on attached usb keyboard or use air mouse remote that has keyboard)
- press a button on remote a couple of times (power a good button to use), now on your usb keyboard type dmesg again
you should see a line that says somthing like "wrong custom code code is ........" I need the information from that line (it should be repeated a few times as you pressed the button a few times).
Techflame
Posts: 6
Joined: Tue Sep 10, 2019 9:57 am
Has thanked: 4 times
Been thanked: 2 times

#7

em3ka wrote: Sat Jun 19, 2021 7:10 am
Techflame wrote: Fri Jun 18, 2021 6:51 am ...surprisingly it doesn't work, that's weird...
Help me out with this
- open Terminal Emulator from appdrawer
- you need to type in dmesg and press ENTER (on attached usb keyboard or use air mouse remote that has keyboard)
- press a button on remote a couple of times (power a good button to use), now on your usb keyboard type dmesg again
you should see a line that says somthing like "wrong custom code code is ........" I need the information from that line (it should be repeated a few times as you pressed the button a few times).
I'm not sure if its this one, cause it's a little bit different than the one you mentioned
You do not have the required permissions to view the files attached to this post.
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#8

Code: Select all

invalid custom:0xae517f80
Thanks, factory code is correct, delete all *.tab files and copy remote.tab1 file (fixed above) into the folder #/vendor/etc and give im correct 0644 permissions.
Techflame
Posts: 6
Joined: Tue Sep 10, 2019 9:57 am
Has thanked: 4 times
Been thanked: 2 times

#9

em3ka wrote: Sun Jun 20, 2021 1:49 am

Code: Select all

invalid custom:0xae517f80
Thanks, factory code is correct, delete all *.tab files and copy remote.tab1 file (fixed above) into the folder #/vendor/etc and give im correct 0644 permissions.
i can't believe it, it FINALLY works! :heart_eyes: Thank you very much! I really appreciate your help
Post Reply