original post by [mention]ricklar[/mention]ricklar wrote: ↑Sun Jan 13, 2019 8:27 am ... solution is to repackage the firmware with different UBOOT files to your specific ram MHz device, AtvX most likely wont work for you.
To unpack stock firmware and pull out the files you need Amlogic CustomizationTool. The Ram and Bootloader need to match for firmware to be usable. The stock files to pull from stock firmware:Most Simple solution I could recommend is to Flash stock firmware,Code: Select all
aml_sdc_burn.UBOOT UBOOT.USB bootloader.PARTITION DDR.USB
Check both Erase All and Erase Bootloader on stock install,
Then plug in TV make sure box is working then unplug,
Load AtvX LPDDR into Burning Tool,
Only check Erase All,
Not check erase bootloader, that will keep stock Bootloader in place.
Burn img and see if it works.
Erasing stock bootloader causes issues for boxes not tested by developers of ROM, so Burning will use built-in AtvX firmware files "UBOOT" and "bootloader" which may change the RAM MHz speed value too high or too low which will cause box not to boot.
Repacking the firmware with different UBOOT files
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
-
- Verified Member
- Posts: 18
- Joined: Mon Jul 09, 2018 8:06 am
- Been thanked: 1 time
Hi There
Im unable to download your tool? Get a 410 Nginx gone error
Im unable to download your tool? Get a 410 Nginx gone error
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
The AMLtools are hosted on xda-developers.com and forum.freaktab.comWebofThrones wrote: ↑Wed Jun 05, 2019 8:25 am Hi There
Im unable to download your tool? Get a 410 Nginx gone error
Use google search to help you find it.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Verified Member
- Posts: 19
- Joined: Thu Mar 21, 2019 9:42 am
- Has thanked: 6 times
- Been thanked: 1 time
Hi,
I've tried to repack the latest ATV v4 img, but the box loops on the ATV logo
box : Magicsee Iron S905X
From stock Rom :
aml_sdc_burn.UBOOT
UBOOT.USB
bootloader.PARTITION
DDR.USB
Thanks for your help
I've tried to repack the latest ATV v4 img, but the box loops on the ATV logo
box : Magicsee Iron S905X
From stock Rom :
aml_sdc_burn.UBOOT
UBOOT.USB
bootloader.PARTITION
DDR.USB
Thanks for your help
-
- Posts: 5
- Joined: Sun Oct 30, 2022 8:11 am
The recommended simple solution is as follows:em3ka wrote: ↑Thu Jan 24, 2019 12:47 pmoriginal post by @ricklarricklar wrote: ↑Sun Jan 13, 2019 8:27 am ... solution is to repackage the firmware with different UBOOT files to your specific ram MHz device, AtvX most likely wont work for you.
To unpack stock firmware and pull out the files you need Amlogic CustomizationTool. The Ram and Bootloader need to match for firmware to be usable. The stock files to pull from stock firmware:Most Simple solution I could recommend is to Flash stock firmware,Code: Select all
aml_sdc_burn.UBOOT UBOOT.USB bootloader.PARTITION DDR.USB
Check both Erase All and Erase Bootloader on stock install,
Then plug in TV make sure box is working then unplug,
Load AtvX LPDDR into Burning Tool,
Only check Erase All,
Not check erase bootloader, that will keep stock Bootloader in place.
Burn img and see if it works.
Erasing stock bootloader causes issues for boxes not tested by developers of ROM, so Burning will use built-in AtvX firmware files "UBOOT" and "bootloader" which may change the RAM MHz speed value too high or too low which will cause box not to boot.
Flash the stock firmware to your device, making sure to check both "Erase All" and "Erase Bootloader" options during installation.
Once the stock firmware is installed and your device is working, unplug the device.
Load the desired AtvX LPDDR firmware into the Burning Tool.
Only check the "Erase All" option and do not check "Erase Bootloader." This will preserve the stock bootloader in place.
Burn the firmware image to your device and see if it works with the new settings.