D905 (S905???) android box issue

MiBox, X96 to name a few...
Post Reply
rfreiha
Posts: 7
Joined: Wed Jan 16, 2019 4:20 am

#1

hi all

i am trying ti install the S905X image on the D905 Android box but i am getting some error in the usb burning tool:

Code: Select all

CheckFileRunState failed
[0x10303004]Romcode/Switch status/Identify/Error result
image name is 1. atvX v5 Multi Wi-Fi (RTL _ BCM) [RID-01.905X.NC.AX.V05.BETA1

any help is appreciated

Thanks
User avatar
em3ka
Moderator
Posts: 1716
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#2

Firmware is not compatible with CPU used in your TV box (S905M-B), check for more in this thread on 4PDA.
rfreiha
Posts: 7
Joined: Wed Jan 16, 2019 4:20 am

#3

bummer.

is there a guide on how to port the atvx manually?

maybe i can give it a shot and have a porting image for these model.

Thanks again for your response
bumerc
Administrator & Developer
Posts: 1649
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 341 times

#4

rfreiha wrote: Tue Dec 28, 2021 4:13 pm bummer.

is there a guide on how to port the atvx manually?

maybe i can give it a shot and have a porting image for these model.

Thanks again for your response
That shouldn't be a problem. Bootloader sources for the s905m are available. Mali driver + dtb also have to be compiled.
rfreiha
Posts: 7
Joined: Wed Jan 16, 2019 4:20 am

#5

I couldnt find any stock rom for the s905m. Is there away i can dump the firmware from the box and use the amalogic cust tools to edit the image?
bumerc
Administrator & Developer
Posts: 1649
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 341 times

#6

rfreiha wrote: Wed Dec 29, 2021 4:30 pm I couldnt find any stock rom for the s905m. Is there away i can dump the firmware from the box and use the amalogic cust tools to edit the image?
Yes you can. But it takes a lot of effort to create a working installation image afterwards. It is easier to port ATV9.
rfreiha
Posts: 7
Joined: Wed Jan 16, 2019 4:20 am

#7

Sounds good. Is there a guide you csn provide me or point to the right direction to port atv9?

Much appreciated
Post Reply