@em3ka
Before discarding the box I would like to make sure that it is really unrepairable. I request your help.
The UART shows like this when connected;
GXL:BL1:9ac50e:a1974b;FEAT:ADFC31AC;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:800;USB:8;
X96W "bricked" ?
-
em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Is these whole UART .log, there should be more (disconnect HDMI cable and remove SD card from device while testing).Nambisan wrote: ↑Fri Mar 18, 2022 5:14 amCode: Select all
GXL:BL1:9ac50e:a1974b;FEAT:ADFC31AC;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:800;USB:8;
-
em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
From which firmware..., did you try to flash .img through UART.
I am not developer, so my help is limited.
-
Nambisan
- Verified Member
- Posts: 14
- Joined: Mon Jun 11, 2018 11:57 pm
- Has thanked: 5 times
- Been thanked: 1 time
I have flashed the official Stock rom for X96W S905W for android 7.1
which only flashes up to 98% and then fails. I have also attached the USB Burning tool log for your information.
which only flashes up to 98% and then fails. I have also attached the USB Burning tool log for your information.
You do not have the required permissions to view the files attached to this post.
