----==== ATVxperience V2H for H96 Pro Plus Black PCB HS2734A ====----
For anyone like me who ordered H96 Pro Plus's for use with ATVxperience and then received these ones, I've successfully ported ATVxperience v2H.
It is the s912_ATVxperienceV2H ported with no other changes to apps or settings.
You can download from here.
Hope this helps others!
H96 Pro Plus Black PCB with HS2734A Wifi WORKING ATVxperience v2H
-
- Posts: 1
- Joined: Tue Mar 19, 2019 12:21 pm
Thanks for this good new.
I ve installed on a H96 pro+ 2/16 Black PCB with HS2734 and the wifi chipset runs pretty good.
Concerning the apps, do you know :
* why google play store open with a error message "no compatible version with your device?".
* Does the voice remote control work with this firmware ?
Thanks.
I ve installed on a H96 pro+ 2/16 Black PCB with HS2734 and the wifi chipset runs pretty good.
Concerning the apps, do you know :
* why google play store open with a error message "no compatible version with your device?".
* Does the voice remote control work with this firmware ?
Thanks.
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
[mention]Rico41[/mention]
Any updates for how this ROM works with your box?
Have you fixed the Google Play errors?
Any updates for how this ROM works with your box?
Have you fixed the Google Play errors?
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!" I've tried using versions 2.1.6 and 2.0.9 of USB Burning Tool with essentially the same error. This does not occur with the official ATVXperience releases.
I'm attempting to flash this onto an m96x plus 16gb/2gb s912 box, which has a very similar board to the black h96 pro pcb and the HS2734A wifi chip. I think that may be irrelevant to the issue I'm having though, as I can't even get USB Burning Tool to import the IMG.
Any suggestions?
I'm attempting to flash this onto an m96x plus 16gb/2gb s912 box, which has a very similar board to the black h96 pro pcb and the HS2734A wifi chip. I think that may be irrelevant to the issue I'm having though, as I can't even get USB Burning Tool to import the IMG.
Any suggestions?
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Thank you, I tried 2.0.7 at your suggestion, but I am still receiving a "get key failed" error.em3ka wrote: ↑Sun Apr 14, 2019 8:20 amUse 2.0.7 version of burning tool. ⬇
https://www.atvxperience.com/download/a ... ool-2-0-7/
I've also tried Burn Card Maker, but I get an android logo with an X when I power it holding the reset button. I've never had much luck with burn card maker though, so it might just be user error.
What else could be suggested to remedy this error?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Although the board may be similar, but the RAM memory may differ, show the photos from the RAMdemhaha wrote: ↑Sun Apr 14, 2019 5:11 am I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!" I've tried using versions 2.1.6 and 2.0.9 of USB Burning Tool with essentially the same error. This does not occur with the official ATVXperience releases.
I'm attempting to flash this onto an m96x plus 16gb/2gb s912 box, which has a very similar board to the black h96 pro pcb and the HS2734A wifi chip. I think that may be irrelevant to the issue I'm having though, as I can't even get USB Burning Tool to import the IMG.
Any suggestions?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
>>Datasheet<<
K4B2G0446C-HCH9 = DDR3-1333, CL9.
Max Clk. Rate = 667Mhz (~648Mhz in uboot)
I'm afraid you need another uboot.
EDIT
I'm doing another build for you. You will be able to update your box from the SD card.
K4B2G0446C-HCH9 = DDR3-1333, CL9.
Max Clk. Rate = 667Mhz (~648Mhz in uboot)
I'm afraid you need another uboot.
EDIT
I'm doing another build for you. You will be able to update your box from the SD card.
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]demhaha[/mention]
This build (above) uses a different amlogic-dt-id, which will result in a 100% install abort if it does not match the dt-id in the preinstalled (original) uboot. Please tell me your current amlogic-dt-id.
Use this command to get the current aml-dt-id:
This build (above) uses a different amlogic-dt-id, which will result in a 100% install abort if it does not match the dt-id in the preinstalled (original) uboot. Please tell me your current amlogic-dt-id.
Use this command to get the current aml-dt-id:
Code: Select all
cat /proc/device-tree/amlogic-dt-id