H96 Pro Plus Black PCB with HS2734A Wifi WORKING ATVxperience v2H

[lparker]

----==== ATVxperience V2H for H96 Pro Plus Black PCB HS2734A ====----

For anyone like me who ordered H96 Pro Plus's for use with ATVxperience and then received these ones, I've successfully ported ATVxperience v2H.

It is the s912_ATVxperienceV2H ported with no other changes to apps or settings.

You can download from here.

Hope this helps others!

[rico2019]

Thanks for this good new.
I ve installed on a H96 pro+ 2/16 Black PCB with HS2734 and the wifi chipset runs pretty good.

Concerning the apps, do you know :

* why google play store open with a error message "no compatible version with your device?".
* Does the voice remote control work with this firmware ?

Thanks.

[ricklar]

[mention]Rico41[/mention]
Any updates for how this ROM works with your box?
Have you fixed the Google Play errors?

[demhaha]

I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!" I've tried using versions 2.1.6 and 2.0.9 of USB Burning Tool with essentially the same error. This does not occur with the official ATVXperience releases.

I'm attempting to flash this onto an m96x plus 16gb/2gb s912 box, which has a very similar board to the black h96 pro pcb and the HS2734A wifi chip. I think that may be irrelevant to the issue I'm having though, as I can't even get USB Burning Tool to import the IMG.

Any suggestions?

[em3ka]

I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!"

Use 2.0.7 version of burning tool. ⬇
https://www.atvxperience.com/download/a ... ool-2-0-7/

[demhaha]

I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!"

Use 2.0.7 version of burning tool. ⬇
https://www.atvxperience.com/download/a ... ool-2-0-7/

Thank you, I tried 2.0.7 at your suggestion, but I am still receiving a "get key failed" error.

I've also tried Burn Card Maker, but I get an android logo with an X when I power it holding the reset button. I've never had much luck with burn card maker though, so it might just be user error.

What else could be suggested to remedy this error?

[bumerc]

I'm having problems installing this rom via USB Burning Tool. When I attempt to import the img, I get an error that reads "key file configuration wrong!" I've tried using versions 2.1.6 and 2.0.9 of USB Burning Tool with essentially the same error. This does not occur with the official ATVXperience releases.

I'm attempting to flash this onto an m96x plus 16gb/2gb s912 box, which has a very similar board to the black h96 pro pcb and the HS2734A wifi chip. I think that may be irrelevant to the issue I'm having though, as I can't even get USB Burning Tool to import the IMG.

Any suggestions?

Although the board may be similar, but the RAM memory may differ, show the photos from the RAM

[demhaha]

Although the board may be similar, but the RAM memory may differ, show the photos from the RAM

Thank you for your help. Here is the board:



However, I think the overarching issue is that I can't import the image into USB Burning Tool without receiving a key error. So, I'm not even to a point where the hardware itself may cause issues.

[bumerc]

>>Datasheet<<
K4B2G0446C-HCH9 = DDR3-1333, CL9.
Max Clk. Rate = 667Mhz (~648Mhz in uboot)
I'm afraid you need another uboot.

EDIT
I'm doing another build for you. You will be able to update your box from the SD card.

[bumerc]

[mention]demhaha[/mention]
This build (above) uses a different amlogic-dt-id, which will result in a 100% install abort if it does not match the dt-id in the preinstalled (original) uboot. Please tell me your current amlogic-dt-id.

Use this command to get the current aml-dt-id:

Code: Select all

cat /proc/device-tree/amlogic-dt-id