[QUESTION] MXQ Pro TV box
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Yet another MXQ device, notorious known for their incompatibility (so many hardware revisions), so the best is to stay with stock firmware, to avoid bricking your tv box.
Your device has RTL8189ETV wi-fi chip (memory type and brand also has to be taken into consideration), you could try a atvX v5 Realtek/SSV build, but that's up to you. Flash only with USB Burning Tool.
Your device has RTL8189ETV wi-fi chip (memory type and brand also has to be taken into consideration), you could try a atvX v5 Realtek/SSV build, but that's up to you. Flash only with USB Burning Tool.
-
- Posts: 2
- Joined: Thu Dec 01, 2022 9:22 am
em3ka wrote: ↑Sat Dec 03, 2022 10:31 am Yet another MXQ device, notorious known for their incompatibility (so many hardware revisions), so the best is to stay with stock firmware, to avoid bricking your tv box.
Your device has RTL8189ETV wi-fi chip (memory type and brand also has to be taken into consideration), you could try a atvX v5 Realtek/SSV build, but that's up to you. Flash only with USB Burning Tool.
thanks for the reply. .
I used it before {2019}【S905X_atvXperience_2FF 1G】it works well,Only the remote control cannot be used,
I don't know how to setting remote.conf ,So I had to use back the original factory firmware,
previous forum can't open,Just found out now forum that I can log in,So I want to try a new firmware for my
Amlogic box.
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
viewtopic.php?t=145
https://mega.nz/folder/GEpQmQhZ#ezNEXQd ... e/SQQy2A6b
Happy testing.
Remote file for new FW... viewtopic.php?t=2451&start=110#p13355