Please help, bricked T95z max.

[kalarepa]

Hi, I flashed Aidan's+ROM+[S912]+[ATV+9]+[DDR3+&+DDR4]
via Amlogic USB Burning Tool to my T95z max and I can't get it to work now. I would like to flash my old ROM T95ZMAX-3GB-v1081 but no method works.
The USB ports are not recognized by the computer.
Updating from the memory card also does not work.
The UART connected to the computer displays continuously like this:

Code: Select all

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 10
CPU clk: 1200MHz
DDR enable rdbi
DQS-corr enabled
DDR scramble enabled
DDR4 chl: Rank0+1 @ 1008MHz - FAIL
DDR4 chl: Rank0 @ 1008MHz - FAIL
DDR4 chl: Rank0 16bit @ 1008MHz - FAIL
DDR init failed...
Reset...
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 36072

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 10
CPU clk: 1200MHz
DDR enable rdbi
DQS-corr enabled
DDR scramble enabled
DDR4 chl: Rank0+1 @ 1008MHz - FAIL
DDR4 chl: Rank0 @ 1008MHz - FAIL
DDR4 chl: Rank0 16bit @ 1008MHz - FAIL
DDR init failed...
Reset...
GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 36092

I am attaching photos of my box.





And these are the names of the components from my box:
H9TQ26ADFTAC URKUM --- emmc flash NAND
H9TQ26ADFTBC URKUM --- emmc flash NAND
H82409s - Ethernet
AP6255 - WiFi
FD628 - LED controller
RAM DDR3 - 3GB.

[em3ka]

...The USB ports are not recognized by the computer...

Short two contacts for a second, and burning tool should detect tv box.

[kalarepa]

Thank you very much.
This method works and I was able to restore the original ROM.
Do you know any custom ROM for my T95z max box?

[em3ka]

No, check other forums, if you find something there, or maybe try this.