Image

Docooler M9S PRO 16G - USB stops at 7 percent

MiBox, X96 to name a few...
Post Reply
Vic
Posts: 2
Joined: Thu Feb 14, 2019 2:32 am

Docooler M9S PRO 16G - USB stops at 7 percent

Post by Vic » Thu Feb 14, 2019 2:43 am

I have tried my times to install different software versions on the site for the s905x box with no luck.

On this box the reset button is through the SPDIF port and the USB 4 is used to upgrade.

Using the USB method i get stopped everytime at 7 percent.

I have also read that although it is advertised as being a 2x16g box, it is really a 1x16g box. I have tried the 1g 2ff version at least 20 times and get stopped a 7 percent each and everytime.

Anyone have any ideas?

Vic
Posts: 2
Joined: Thu Feb 14, 2019 2:32 am

Post by Vic » Thu Feb 14, 2019 3:18 am

Looking at the driver installed it says libusb-win32 Usb Devices - WorldCup Device.

IDK what is WorldCup about the M9S Pro.

User avatar
em3ka
Moderator
Posts: 154
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 10 times
Been thanked: 28 times

Post by em3ka » Thu Feb 14, 2019 9:08 am

Vic wrote:
Thu Feb 14, 2019 2:43 am
and get stopped a 7 percent each and everytime
viewtopic.php?f=16&t=572

hannah
Posts: 7
Joined: Sun Jan 20, 2019 11:15 pm

Post by hannah » Sat Feb 16, 2019 2:33 am

Vic wrote:
Thu Feb 14, 2019 3:18 am
Looking at the driver installed it says libusb-win32 Usb Devices - WorldCup Device.

IDK what is WorldCup about the M9S Pro.
Let us know if you are able to install atvexperince in this box. I have a few of this and had never been able to install this rom and had the same experience as you had.

By saying that I did not try what " em3ka" is suggesting.

You may like to check my earlier post here:
viewtopic.php?f=3&t=86&p=3718#p3718

bumerc
Moderator
Posts: 321
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 16 times
Been thanked: 38 times

Post by bumerc » Sat Feb 16, 2019 9:52 am

Vic wrote:
Thu Feb 14, 2019 2:43 am
I have tried my times to install different software versions on the site for the s905x box with no luck.

On this box the reset button is through the SPDIF port and the USB 4 is used to upgrade.

Using the USB method i get stopped everytime at 7 percent.

I have also read that although it is advertised as being a 2x16g box, it is really a 1x16g box. I have tried the 1g 2ff version at least 20 times and get stopped a 7 percent each and everytime.

Anyone have any ideas?
Hi,
Specifications of your RAM memory:
-K4B1G0446F-HCH9 = DDR3-1333 (9-9-9)
-Configuration 256M x 4 = 1024Mb
• 533MHz fCK for 1066Mb/sec/pin, 667MHz fCK for 1333Mb/sec/pin, 800MHz fCK for 1600Mb/sec/pin, 933MHz fCK for 1866Mb/sec/pin
• 8 Banks
• Posted CAS
• Programmable CAS Latency(posted CAS): 6, 7, 8, 9, 10, 11
• Programmable Additive Latency: 0, CL-2 or CL-1 clock
• Programmable CAS Write Latency (CWL) = 6 (DDR3-1066), 7 (DDR3-1333), 8 (DDR3-1600) and 9 (DDR3-1866)
DDR3-1333 = CWL = 7; 1333/2 = ~ 667Mhz
Programmable Clk. Rate in u-boot = 648Mhz.
You need another Bootloader + meson1.dtb (due to 7% eMMC initialization error). Wait for update.

Datasheet

bumerc
Moderator
Posts: 321
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 16 times
Been thanked: 38 times

Post by bumerc » Sun Feb 17, 2019 6:38 pm

M9S Pro test Image >>Download<<

Installation via SDcard or ABT.

Post Reply