Hello everyone,
I am having some trouble with my TX3 Mini-A. Specifically, I am experiencing issues with the WiFi and LED lights on the device didn't light up. I have tried troubleshooting the problems on my own, but I have not been successful. I am hoping that someone in this forum can offer some assistance.
The first issue I am encountering is with the WiFi connectivity. The device doesn't have connectivity.
The second issue I am encountering is with the LED lights on the device. The LED also not appears.
I have tried resetting the device to its default settings, but that did not resolve the problems. I am now considering updating the firmware, but I am not sure how to find compatible firmware for the device.
If anyone has experienced similar issues with their TX3 Mini-A Android TV box or has any suggestions for troubleshooting the problems I am encountering, I would greatly appreciate your help. Thank you in advance for any assistance you can offer.
[S905X] TX3 Mini-A (Wifi and LED Problem)
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
Try with different network settings in the box and on the router, by turning off/using 2.4 or 5 GHz band, switching to other wi-fi channels...hanifzam96 wrote: ↑Mon Aug 28, 2023 4:23 am The first issue I am encountering is with the WiFi connectivity. The device doesn't have connectivity.
On stock FW ? Reset device to factory defaults.hanifzam96 wrote: ↑Mon Aug 28, 2023 4:23 am The second issue I am encountering is with the LED lights on the device. The LED also not appears.
-
- Posts: 3
- Joined: Mon Aug 28, 2023 4:02 am
I have reflashes using stock firmware - Tanix TX3 Mini Firmware 20171220. All complete on setup but, my network and LED doesn't appear. I have found other firmware and try to reflash but didn't work too. How to solve this problem. Here the link stock firmware am use.
https://mega.nz/file/LQVy3LpR#g0WHrl4SR ... 64vtQubhuU
Thank you.
https://mega.nz/file/LQVy3LpR#g0WHrl4SR ... 64vtQubhuU
Thank you.
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
You have some kind of inbred device that comes with S905X instead of S905W cpu - like in original TX3 mini, and with SP6330 dual band wi-fi/bt combo chip.
You need original factory firmware of that new device, old Tanix firmware will not resolve your issues.hanifzam96 wrote: ↑Mon Aug 28, 2023 10:13 am I have reflashes using stock firmware - Tanix TX3 Mini Firmware 20171220. All complete on setup but, my network and LED doesn't appear.....
-
- Posts: 3
- Joined: Mon Aug 28, 2023 4:02 am
Do you have any ideas to solve this problem? I have researched and tried about 12 firmware versions, but none of them resolved my issue. Sometimes, a few firmware versions light up the LEDs on my LED clock, but the screen remains blank. I'm currently stuck and unsure how to proceed.