[S905X] TX3 Mini-A (Wifi and LED Problem)

MiBox, X96 to name a few...
Post Reply
hanifzam96
Posts: 3
Joined: Mon Aug 28, 2023 4:02 am
Answers: 0

#1

Hello everyone,

I am having some trouble with my TX3 Mini-A. Specifically, I am experiencing issues with the WiFi and LED lights on the device didn't light up. I have tried troubleshooting the problems on my own, but I have not been successful. I am hoping that someone in this forum can offer some assistance.

The first issue I am encountering is with the WiFi connectivity. The device doesn't have connectivity.

The second issue I am encountering is with the LED lights on the device. The LED also not appears.

I have tried resetting the device to its default settings, but that did not resolve the problems. I am now considering updating the firmware, but I am not sure how to find compatible firmware for the device.

If anyone has experienced similar issues with their TX3 Mini-A Android TV box or has any suggestions for troubleshooting the problems I am encountering, I would greatly appreciate your help. Thank you in advance for any assistance you can offer.


Image

Image

Image
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#2

hanifzam96 wrote: ↑Mon Aug 28, 2023 4:23 am The first issue I am encountering is with the WiFi connectivity. The device doesn't have connectivity.
Try with different network settings in the box and on the router, by turning off/using 2.4 or 5 GHz band, switching to other wi-fi channels...
hanifzam96 wrote: ↑Mon Aug 28, 2023 4:23 am The second issue I am encountering is with the LED lights on the device. The LED also not appears.
On stock FW ? Reset device to factory defaults.
Top
hanifzam96
Posts: 3
Joined: Mon Aug 28, 2023 4:02 am
Answers: 0

#3

I have reflashes using stock firmware - Tanix TX3 Mini Firmware 20171220. All complete on setup but, my network and LED doesn't appear. I have found other firmware and try to reflash but didn't work too. How to solve this problem. Here the link stock firmware am use.
https://mega.nz/file/LQVy3LpR#g0WHrl4SR ... 64vtQubhuU

Thank you.
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#4

You have some kind of inbred device that comes with S905X instead of S905W cpu - like in original TX3 mini, and with SP6330 dual band wi-fi/bt combo chip.
hanifzam96 wrote: ↑Mon Aug 28, 2023 10:13 am I have reflashes using stock firmware - Tanix TX3 Mini Firmware 20171220. All complete on setup but, my network and LED doesn't appear.....
You need original factory firmware of that new device, old Tanix firmware will not resolve your issues.
Top
hanifzam96
Posts: 3
Joined: Mon Aug 28, 2023 4:02 am
Answers: 0

#5

Do you have any ideas to solve this problem? I have researched and tried about 12 firmware versions, but none of them resolved my issue. Sometimes, a few firmware versions light up the LEDs on my LED clock, but the screen remains blank. I'm currently stuck and unsure how to proceed. 😮‍💨😥
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#6

hanifzam96 wrote: ↑Wed Aug 30, 2023 7:21 pm ...I have researched and tried about 12 firmware versions...
Try this.
Top
Post Reply

Return to “S905X”