[HELP] x96mini 2+16GB bricked

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#1

Because of flashing atvXperience, my x96 mini is bricked. my board is q6x v2.2 17355. I tried a lot of method from google search. but all of them are failed. for example (https://blog.danman.eu/bricking-and-unb ... -x96-mini/)
or (https://techinfo-ti.blogspot.com/2022/0 ... -mini.html)

modEDIT:
Image

Post photo of PCB's front side also.
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#2

Code: Select all

[18:19:47 022][Global][Inf]--User click start button
[18:19:47 023][Global][Inf]--SetErase
[18:19:47 024][Global][Inf]--Enable burning 1
[18:19:47 025][Global][Inf]--Scan usb device
[18:19:47 025][Global][Inf]--Aml scan WorldCup Device
[18:19:47 036][Global][Inf]--Burning thread HUB3-1 start
[18:19:47 045][Global][Inf]--Host: 英特尔(R) USB 3.0 可扩展主机控制器
[18:19:47 045][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_0f35&subsys_0f358086&rev_0e#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[18:19:47 045][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&17eb9b7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:19:47 045][Global][Inf]-------->[Port0]IUSB3#VID_0BC2&PID_AB44#01CB6446B0F5#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:19:47 061][Global][Inf]---------->[Port0]Other device
[18:19:47 061][Global][Inf]---------->[Port1]NoDeviceConnected
[18:19:47 061][Global][Inf]---------->[Port2]NoDeviceConnected
[18:19:47 064][Global][Inf]-------->[Port1]Other device
[18:19:47 064][Global][Inf]-------->[Port2]NoDeviceConnected
[18:19:47 064][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0608#5&3ade7055&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:19:47 074][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[18:19:47 074][Global][Inf]---------->[Port1]NoDeviceConnected
[18:19:47 074][Global][Inf]---------->[Port2]NoDeviceConnected
[18:19:47 075][Global][Inf]---------->[Port3]NoDeviceConnected
[18:19:47 075][Global][Inf]-------->[Port4]NoDeviceConnected
[18:19:47 075][Global][Inf]-------->[Port5]NoDeviceConnected
[18:19:47 077][Global][Inf]-------->[Port6]Other device
[18:19:47 077][Global][Inf]--Scan USB host controller complete
[18:19:47 078][Global][Inf]--Update data center with HubMap
[18:19:47 078][Global][Inf]--Update hub3 device data
[18:19:47 078][Global][Inf]--Update HUB3-1 \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[18:19:47 078][HUB3-1][Inf]--Update device path
[18:19:47 078][Global][Inf]--Update HUB3-2 
[18:19:47 078][HUB3-2][Inf]--Update device path
[18:19:47 078][Global][Inf]--Update HUB3-3 
[18:19:47 078][HUB3-3][Inf]--Update device path
[18:19:47 078][Global][Inf]--Update HUB3-4 
[18:19:47 078][HUB3-4][Inf]--Update device path
[18:19:47 078][Global][Inf]--Scan end 
[18:19:47 086][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000006f0
[18:19:47 136][HUB3-1][Inf]--New CloneImageProxy
[18:19:47 136][Global][Inf]--OpenImg G:\x96min\X96W S905W firmware\aml_upgrade_package.img
[18:19:47 138][HUB3-1][Inf]--Connect path=英特尔(R) USB 3.0 可扩展主机控制器/P0/P3/P0
[18:19:47 138][HUB3-1][Inf]--Start burning...
[18:19:47 188][HUB3-1][Inf]--------------ERASE BOOTLOADER------------
[18:19:47 288][HUB3-1][Inf]--start SendIdentifyCmd
[18:19:47 289][HUB3-1][Inf]--2-4-0-0
[18:19:47 289][HUB3-1][Inf]-------------Download DDR.USB-----------
[18:19:47 290][HUB3-1][Inf]--2-4-0-0
[18:19:47 290][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[18:19:47 801][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[18:19:48 302][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[18:19:48 803][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[18:19:49 304][HUB3-1][Inf]--Write initial succeed
[18:19:49 304][HUB3-1][Inf]--Upload encrypt at 0xc8100228
[18:19:49 305][HUB3-1][Inf]--ulValue = 0xbdfc31bc
[18:19:49 305][HUB3-1][Inf]--File change to DDR_ENC.USB
[18:19:49 305][HUB3-1][Inf]--Read encrypt value succeed
[18:19:49 305][HUB3-1][Inf]--Download DDR_ENC.USB,size: 0!
[18:19:49 305][Global][Err]--DDR_ENC.USB
[18:19:49 305][Global][Err]--DDR_ENC.USB
[18:19:49 305][HUB3-1][Err]--Read item data error, code -1
[18:19:49 305][Global][Err]--DDR_ENC.USB
[18:19:49 328][HUB3-1][Err]--[0x10103005]Romcode/初始化DDR/下载数据/读取镜像失败
[18:19:49 331][HUB3-1][Inf]--Close device handle 0x000006f0
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#3

Image
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#4

Image
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#5

zcrself wrote: ↑Sun Oct 22, 2023 11:29 pm Image
Place the license folder in the root of the installed UBT program and flash stock image.

:point_right: license.zip (GDrive)
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#6

em3ka wrote: ↑Mon Oct 23, 2023 9:29 am
zcrself wrote: ↑Sun Oct 22, 2023 11:29 pm Image
Place the license folder in the root of the installed UBT program and flash stock image.

:point_right: license.zip (GDrive)
Thanks a lot for your reply. I will try it
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#7

still error

Code: Select all

[20:51:11 031][Global][Inf]--USB_Burning_Tool soft Version: V2.1.9.0
[20:51:11 032][Global][Inf]--Windows Version: Microsoft Windows 7, Bit: 64
[20:51:11 032][Global][Inf]--Scan usb device
[20:51:11 032][Global][Inf]--Aml scan WorldCup Device
[20:51:11 037][Global][Inf]--Host: 英特尔(R) USB 3.0 可扩展主机控制器
[20:51:11 037][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_0f35&subsys_0f358086&rev_0e#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:51:11 038][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&17eb9b7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:51:11 038][Global][Inf]-------->[Port0]IUSB3#VID_0BC2&PID_AB44#01CB6446B0F5#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:51:11 060][Global][Inf]---------->[Port0]Other device
[20:51:11 060][Global][Inf]---------->[Port1]NoDeviceConnected
[20:51:11 060][Global][Inf]---------->[Port2]NoDeviceConnected
[20:51:11 063][Global][Inf]-------->[Port1]Other device
[20:51:11 063][Global][Inf]-------->[Port2]NoDeviceConnected
[20:51:11 063][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0608#5&3ade7055&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:51:11 066][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:51:11 066][Global][Inf]---------->[Port1]NoDeviceConnected
[20:51:11 066][Global][Inf]---------->[Port2]NoDeviceConnected
[20:51:11 066][Global][Inf]---------->[Port3]NoDeviceConnected
[20:51:11 066][Global][Inf]-------->[Port4]NoDeviceConnected
[20:51:11 067][Global][Inf]-------->[Port5]NoDeviceConnected
[20:51:11 069][Global][Inf]-------->[Port6]Other device
[20:51:11 069][Global][Inf]--Scan USB host controller complete
[20:51:11 070][Global][Inf]--Update data center with HubMap
[20:51:11 070][Global][Inf]--Insert new hub3
[20:51:11 070][Global][Inf]--Update hub3 device data
[20:51:11 070][Global][Inf]--Update HUB3-1 \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:51:11 070][HUB3-1][Inf]--Update device path
[20:51:11 070][Global][Inf]--Begin thread for HUB3-1
[20:51:11 070][Global][Inf]--Burning thread HUB3-1 start
[20:51:11 070][Global][Inf]--Update HUB3-2 
[20:51:11 070][HUB3-2][Inf]--Update device path
[20:51:11 071][Global][Inf]--Burning thread HUB3-1 begin run
[20:51:11 071][Global][Inf]--Update HUB3-3 
[20:51:11 071][HUB3-3][Inf]--Update device path
[20:51:11 071][Global][Inf]--Update HUB3-4 
[20:51:11 071][HUB3-4][Inf]--Update device path
[20:51:11 071][Global][Inf]--Add Hub3: \\.\USB#VID_05E3&PID_0608#5&3ade7055&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[20:51:11 071][Global][Inf]--Scan end 
[20:51:23 300][Global][Inf]--User click open button
[20:51:28 107][Global][Inf]--Image path F:\konka\x96mini-Firmware Support RAM 2GB ROM 16GB.img
[20:51:28 107][Global][Inf]--OpenImg F:\konka\x96mini-Firmware Support RAM 2GB ROM 16GB.img
[20:51:38 261][Global][Inf]--check img crc success! 
[20:51:38 262]Parse platform.conf 
[20:51:38 264][Global][Inf]--Parsing burning package
[20:51:38 264][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[20:51:38 264][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[20:51:38 268][Global][Inf]--Get burning key
[20:52:10 397][Global][Inf]--User click start button
[20:52:10 398][Global][Inf]--SetErase
[20:52:10 398][Global][Inf]--Enable burning 1
[20:52:10 399][Global][Inf]--Scan usb device
[20:52:10 399][Global][Inf]--Aml scan WorldCup Device
[20:52:10 401][Global][Inf]--Host: 英特尔(R) USB 3.0 可扩展主机控制器
[20:52:10 401][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_0f35&subsys_0f358086&rev_0e#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:52:10 401][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&17eb9b7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:10 401][Global][Inf]-------->[Port0]IUSB3#VID_0BC2&PID_AB44#01CB6446B0F5#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:10 404][Global][Inf]---------->[Port0]Other device
[20:52:10 404][Global][Inf]---------->[Port1]NoDeviceConnected
[20:52:10 404][Global][Inf]---------->[Port2]NoDeviceConnected
[20:52:10 407][Global][Inf]-------->[Port1]Other device
[20:52:10 407][Global][Inf]-------->[Port2]NoDeviceConnected
[20:52:10 407][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0608#5&3ade7055&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:10 410][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:52:10 410][Global][Inf]---------->[Port1]NoDeviceConnected
[20:52:10 410][Global][Inf]---------->[Port2]NoDeviceConnected
[20:52:10 410][Global][Inf]---------->[Port3]NoDeviceConnected
[20:52:10 410][Global][Inf]-------->[Port4]NoDeviceConnected
[20:52:10 410][Global][Inf]-------->[Port5]NoDeviceConnected
[20:52:10 413][Global][Inf]-------->[Port6]Other device
[20:52:10 413][Global][Inf]--Scan USB host controller complete
[20:52:10 413][Global][Inf]--Update data center with HubMap
[20:52:10 413][Global][Inf]--Update hub3 device data
[20:52:10 413][Global][Inf]--Update HUB3-1 \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:52:10 413][HUB3-1][Inf]--Update device path
[20:52:10 413][Global][Inf]--Update HUB3-2 
[20:52:10 413][HUB3-2][Inf]--Update device path
[20:52:10 413][Global][Inf]--Update HUB3-3 
[20:52:10 413][HUB3-3][Inf]--Update device path
[20:52:10 413][Global][Inf]--Update HUB3-4 
[20:52:10 413][HUB3-4][Inf]--Update device path
[20:52:10 413][Global][Inf]--Scan end 
[20:52:10 422][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000500
[20:52:10 472][HUB3-1][Inf]--CloneImageProxy
[20:52:10 472][Global][Inf]--OpenImg F:\konka\x96mini-Firmware Support RAM 2GB ROM 16GB.img
[20:52:10 472][HUB3-1][Inf]--Connect path=英特尔(R) USB 3.0 可扩展主机控制器/P0/P3/P0
[20:52:10 472][HUB3-1][Inf]--Start burning...
[20:52:10 522][HUB3-1][Inf]--------------ERASE BOOTLOADER------------
[20:52:10 622][HUB3-1][Inf]--start SendIdentifyCmd
[20:52:10 623][HUB3-1][Inf]--2-4-0-0
[20:52:10 623][HUB3-1][Inf]-------------Download DDR.USB-----------
[20:52:10 624][HUB3-1][Inf]--2-4-0-0
[20:52:10 624][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:52:11 125][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:52:11 626][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:52:12 127][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:52:12 628][HUB3-1][Inf]--Write initial succeed
[20:52:12 628][HUB3-1][Inf]--Upload encrypt at 0xc8100228
[20:52:12 629][HUB3-1][Inf]--ulValue = 0xbdfc31bc
[20:52:12 629][HUB3-1][Inf]--File change to DDR_ENC.USB
[20:52:12 629][HUB3-1][Inf]--Read encrypt value succeed
[20:52:12 629][HUB3-1][Inf]--Download DDR_ENC.USB,size: 0!
[20:52:12 629][Global][Err]--DDR_ENC.USB
[20:52:12 629][Global][Err]--DDR_ENC.USB
[20:52:12 629][HUB3-1][Err]--Read item data error, code -1
[20:52:12 629][Global][Err]--DDR_ENC.USB
[20:52:12 657][HUB3-1][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[20:52:12 658][HUB3-1][Inf]--Close device handle 0x00000500
[20:52:15 518][Global][War]--User click stop button
[20:52:15 518][Global][Inf]--Enable burning 0
[20:52:19 882][Global][Inf]--User click open button
[20:52:31 355][Global][Inf]--Image path G:\x96min\aml_upgrade_package.img
[20:52:31 355][Global][Inf]--OpenImg G:\x96min\aml_upgrade_package.img
[20:52:38 962][Global][Inf]--check img crc success! 
[20:52:38 963]Parse platform.conf 
[20:52:38 965][Global][Inf]--Parsing burning package
[20:52:38 966][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[20:52:38 966][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[20:52:38 971][Global][Inf]--Get burning key
[20:52:42 801][Global][Inf]--User click start button
[20:52:42 801][Global][Inf]--SetErase
[20:52:42 802][Global][Inf]--Enable burning 1
[20:52:42 802][Global][Inf]--Scan usb device
[20:52:42 802][Global][Inf]--Aml scan WorldCup Device
[20:52:42 804][Global][Inf]--Host: 英特尔(R) USB 3.0 可扩展主机控制器
[20:52:42 804][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_0f35&subsys_0f358086&rev_0e#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[20:52:42 804][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&17eb9b7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:42 804][Global][Inf]-------->[Port0]IUSB3#VID_0BC2&PID_AB44#01CB6446B0F5#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:42 807][Global][Inf]---------->[Port0]Other device
[20:52:42 808][Global][Inf]---------->[Port1]NoDeviceConnected
[20:52:42 808][Global][Inf]---------->[Port2]NoDeviceConnected
[20:52:42 810][Global][Inf]-------->[Port1]Other device
[20:52:42 810][Global][Inf]-------->[Port2]NoDeviceConnected
[20:52:42 810][Global][Inf]-------->[Port3]USB#VID_05E3&PID_0608#5&3ade7055&0&4#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[20:52:42 813][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:52:42 813][Global][Inf]---------->[Port1]NoDeviceConnected
[20:52:42 813][Global][Inf]---------->[Port2]NoDeviceConnected
[20:52:42 813][Global][Inf]---------->[Port3]NoDeviceConnected
[20:52:42 813][Global][Inf]-------->[Port4]NoDeviceConnected
[20:52:42 813][Global][Inf]-------->[Port5]NoDeviceConnected
[20:52:42 818][Global][Inf]-------->[Port6]Other device
[20:52:42 818][Global][Inf]--Scan USB host controller complete
[20:52:42 818][Global][Inf]--Update data center with HubMap
[20:52:42 818][Global][Inf]--Update hub3 device data
[20:52:42 818][Global][Inf]--Update HUB3-1 \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[20:52:42 818][HUB3-1][Inf]--Update device path
[20:52:42 818][Global][Inf]--Update HUB3-2 
[20:52:42 818][HUB3-2][Inf]--Update device path
[20:52:42 818][Global][Inf]--Update HUB3-3 
[20:52:42 818][HUB3-3][Inf]--Update device path
[20:52:42 818][Global][Inf]--Update HUB3-4 
[20:52:42 818][HUB3-4][Inf]--Update device path
[20:52:42 818][Global][Inf]--Scan end 
[20:52:42 818][Global][Inf]--Burning thread HUB3-1 start
[20:52:42 868][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&16a32303&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000694
[20:52:42 918][HUB3-1][Inf]--New CloneImageProxy
[20:52:42 918][Global][Inf]--OpenImg G:\x96min\aml_upgrade_package.img
[20:52:42 918][HUB3-1][Inf]--Connect path=英特尔(R) USB 3.0 可扩展主机控制器/P0/P3/P0
[20:52:42 918][HUB3-1][Inf]--Start burning...
[20:52:42 968][HUB3-1][Inf]--------------ERASE BOOTLOADER------------
[20:52:43 068][HUB3-1][Inf]--start SendIdentifyCmd
[20:52:43 069][HUB3-1][Inf]--2-4-0-0
[20:52:43 069][HUB3-1][Inf]-------------Download DDR.USB-----------
[20:52:43 070][HUB3-1][Inf]--2-4-0-0
[20:52:43 070][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:52:43 571][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:52:44 072][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[20:52:44 573][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[20:52:45 074][HUB3-1][Inf]--Write initial succeed
[20:52:45 074][HUB3-1][Inf]--Upload encrypt at 0xc8100228
[20:52:45 075][HUB3-1][Inf]--ulValue = 0xbdfc31bc
[20:52:45 075][HUB3-1][Inf]--File change to DDR_ENC.USB
[20:52:45 075][HUB3-1][Inf]--Read encrypt value succeed
[20:52:45 075][HUB3-1][Inf]--Download DDR_ENC.USB,size: 0!
[20:52:45 075][Global][Err]--DDR_ENC.USB
[20:52:45 075][Global][Err]--DDR_ENC.USB
[20:52:45 075][HUB3-1][Err]--Read item data error, code -1
[20:52:45 075][Global][Err]--DDR_ENC.USB
[20:52:45 103][HUB3-1][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[20:52:45 105][HUB3-1][Inf]--Close device handle 0x00000694
[20:52:49 869][Global][War]--User click stop button
[20:52:49 870][Global][Inf]--Enable burning 0
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#8

Image
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#9

Image
Top
zcrself
Verified Member
Posts: 11
Joined: Mon Nov 26, 2018 6:43 am
Answers: 0
Has thanked: 2 times

#10

Image
Top
Post Reply

Return to “S905W”