[ROM] Magicsee N5 - atvXperience v2 N5 Edition

MiBox, X96 to name a few...
Post Reply
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#61

Buenos días.
Adquirí actualmente un Magicsee N5 y lo primero que hice fue cambiar la rom stock (que es horrible por cierto) por la ATVxperience V2 adaptada al N5.
Va genial salvo una cosa. El control remoto. Funciona bien mientras está encendido pero cuando lo apago no puedo encenderlo con el control remoto. Debo quitar y poner el cable power.
Alguna solución por favor ???

Gracias
bumerc
Administrator & Developer
Posts: 1649
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 342 times

#62

kikko123 wrote: Sat May 16, 2020 12:27 pm Buenos días.
Adquirí actualmente un Magicsee N5 y lo primero que hice fue cambiar la rom stock (que es horrible por cierto) por la ATVxperience V2 adaptada al N5.
Va genial salvo una cosa. El control remoto. Funciona bien mientras está encendido pero cuando lo apago no puedo encenderlo con el control remoto. Debo quitar y poner el cable power.
Alguna solución por favor ???

Gracias
From now on, posts without proper translation will be deleted without warning, have respect for the team and translate your texts into English
thx
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#63

Good Morning
I currently purchased a Magicsee N5 and the first thing I did was change the stock of rom (which is horrible by the way) for the ATVxperience V2 adapted to the N5.
It is great except for one thing. The remote control. It works fine while powered on but when I turn it off I can't turn it on with the remote. I must remove and put the power cord.
Any solution please?

Thank you
bumerc
Administrator & Developer
Posts: 1649
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 254 times
Been thanked: 342 times

#64

You need a u-boot that contains the power key code of your remote control. Post your original remote.conf file here, we will integrate it into atv9 build
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#65

These are the files I found on the original rom
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#66

Remote.rar
You do not have the required permissions to view the files attached to this post.
User avatar
em3ka
Moderator
Posts: 1722
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 128 times
Been thanked: 357 times

#67

vinitroiano wrote: Tue May 26, 2020 2:18 pm ...i installed the rom, the USB Burning Tool no longer recognized my tv box...
Everything, in principle, is standard. The procedure is important.
1) Run the USB Burning Tool, select the original (or 100% working on this box) firmware. Click Start.
2) Clamp the reset on the box, apply external power through the power connector.
3) Short the 29th and 30th pins on NAND. In our boxing, this is the 5th and 6th pins after the triangle. Those. on the inductance side, marked 2R2.
4) Stick in the firmware cable. Boxing should be determined, and the firmware process should begin. Then everything is as usual.
[translation from: 4PDA.ru]

P1010004.jpg
You do not have the required permissions to view the files attached to this post.
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#68

is there any solution for my problem. everything works very well for me. the problem is that I can't turn on the TV box with the remote control. everything else works great.
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#69

Good Morning. I found this other file in another official stock rom of the Magicsee n5
remote.conf
You do not have the required permissions to view the files attached to this post.
kikko123
Posts: 9
Joined: Thu Nov 21, 2019 6:46 pm

#70

Any solution to my problem? Thank you
Post Reply