Code: Select all
gxl_s905x013_2gs905x013
Code: Select all
gxl_s905x013_2gs905x013
This is not good. The manufacturer made changes to the uboot code and modified it. In this case, a direct upgrade to the atvx bootloader is not possible, this requires a standart dt-id gxl_p212_1g or gxl_p212_2g. What you can do about it - You can try to extract the atvx-dtb file and replace it with the terminal command in the running Android system, switch off the box and then run the SDcard upgrade on atvx.mxfreak wrote: ↑Wed Mar 20, 2019 9:52 pmGrabbed with terminal from an original geekbuying mxq pro+ rom,i believe something dated from 11 2017Code: Select all
gxl_s905x013_2gs905x013
Code: Select all
dd if=/sdcard/dtb.img of=/dev/block/dtb bs=256K && sync
He has also gxl_s905x013_2g is this really different with my mx pro+ 2g/16g box ?@mecharn
You have a little problem.
Your aml_dt
gxl_s905x013_2g
This means that you have a custom bootloader and we first need to write the atvx DTB to the emmc with the correct aml_dt and partition table for the full upgrade to atvX.
I can temporarily create an extra build for you with the original bootloader, so you can use atvX first. If you later want to change the bootloader, we have to take some more complicated steps.
erase bootloader „yes“mxfreak wrote: ↑Fri Mar 22, 2019 6:08 pm Edit 3 : image writed with sdcardtool 2.02.formatsdcard yes,erase flash yes,erase bootloader no,reset yes,done
Power off,Inserted in mxq,press reset,power on,wait little,upgrading green,it runs,then screens goes black,and then starts again with green upgrading and stops directly and stays forever....i must shutdown power.
That grreen upgrading loop i had also with the different versions of atv xperience roms
Another solution maybe ?