atvXperience S905X General Discussion

[kingkayz]

Please what is the latest for s905x. Can I flash
atvX_p212_Oreo.7z

[Vladimir1973]

Здравствуйте. Смогу ли я поставить atvXperience на мою приставку zxv10 b860h ???

modEDIT:
Hello. Can I install atvXperience on my zxv10 b860h console ??? [google translate]

[fedediaz]

WiFi on my box stopped working suddenly after being fine for a few days, so my solution might not work. I think it had something to do with the clean xperience app. Restarting or resetting didn't work.

I finally tried flashing the original ROM first to see if the WiFi antenna was still working and let system boot completely once. Just turn it off without changing settings or anything. Then I flashed v2E again and it fixed the problem for me. Even after going through all that, it somehow seemed to help make animations smoother.

[solac03]

hi,

i have t95n box 2+8g with sci wifi, can this f/w work for this box ? what firmware do i use ?

[SOULFUL]

Hello everyone, I ask for help. I have a box with an amlogic s905x / mali-450 / 2gb.
installed version of android 7.1.2 ..... I want to install the latest version of atvxperience final but such a problem ... for some reason there are no drivers for my wifi chip (wt6354).... I do not work wifi and bluetooth
Because of this, I had to return to android 7.1.2 again

[Dukatt1]

I own a projector with android on board. s905x 2/16 bcm4334. Wi-fi does not work. According to the instructions, I copied the files from the stock firmware, it does not work. Unpacked boot.img and copied the folder to boot.img atv. Does not work. what else can i do? can someone help me? If you need any files from the firmware, I will gladly provide

I think that the problem is in the kernel, because it does not know that I have a wifi chip - bcm4334, because there were no files in the firmware for it

[r3musel]

Hello guys,

I got recently from my friend gift Dolamee D6 1GB ram 8gb rom with firmware s905x_1G_atvXperience_v2FF and i have issue with Wifi and ethernet cable is not stable is working first 5 minute after that is drop again need to reset and reconect internet.And when i try wifi still not connected ,can someone tell me what happened?How can i fix?
AtvExperience is the best !!!!
i have try everything from internet to solve and nothing. wifi is RTL 8189 ,A95X, 1G/8GB ,20170224

Many thanks

[r3musel]

Hello guys,

I got recently from my friend gift Dolamee D6 1GB ram 8gb rom with firmware s905x_1G_atvXperience_v2FF and i have issue with Wifi and ethernet cable is not stable is working first 5 minute after that is drop again need to reset and reconect internet.And when i try wifi still not connected ,can someone tell me what happened?How can i fix?
AtvExperience is the best !!!!
i have try everything from internet to solve and nothing. wifi is RTL 8189 ,A95X, 1G/8GB ,20170224

Many thanks

REGARDING MY ISSUE:
i think i found the issue DONT TRY TO UPDATE ATVEXPERIENCE firmware is made big problem with your connexion.after update i got issue with wifi and ethernet.
AFTER UPDATE IS NOT WORKING PROPERLY.LEAVE LIKE THAT AFTER FLASHING WITH ATVEXPERIENCE.

[sapateira]

I've a v2FF img that has been tweaked over the time, and I didn't want to go back and do it all over again from scratch on v2f. Is it possible for me to change my v2FF and make it instalable from SDCard Maker? What do I need to do?

Note: only the V2F firmware is formatted to be installed by SDcard Maker, can not use the V2FF which can only be installed with USB Burning Tool and USB-to-USB cable.

[didux]

Although this version does not officially supports this method, I was able to flash v2FF on my box via sdcard in the past, but I don' t know if I only had beginner luck or if it depends on the device!? I did not tried a second time, so you have to confirm on your own. Maybe you get a brick!!! Stock Android 7.1.2 running on the box before flashing! Here are the steps:

1) format microsd with this tool - do not use other tools!!!
https://www.sdcard.org/downloads/formatter/

2) uncheck format/partition option in burncardmaker

3) uncheck erase bootloader option in burncardmaker

4) choose the image

5) make the card

I´m not responsible for bricked devices, so try only if you know how to recover (unbrick)!!!