[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool [RELEASE] TWRP Recovery for S905W - Page 5 - atvXperience : The Forum
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Not match any dtb.
start dts,buffer=0000000001000000,dt_addr=0000000001000000
check_valid_dts: FDT_ERR_BADMAGIC
get_partition_from_dts: -9
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_download.c)L761:Failed at get_partition_from_dts
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_sdc_burn.c)L663:Fail to
during flashing, dtb is loaded into the RAM memory at 0x1000000 (dtb_mem_addr), nand memory is initialized and then partitioned, only then are all other partitions written to the already partitioned memory area of u-boot. In your case, dtb is not found because it appears to have not been configured or configured incorrectly in image.cfg, and optimus_download.c driver returns the error.
1. Copy _aml_dtb.PARTITION to the same SD card by hand (unpack the IMG beforehand)
2 DO NOT connect your box to HDMI cables and only leave uart connected
3. Cancel the autoboot, press ENTER or spacebar as soon as you have connected the box to the mains.
4. Now execute the following commands in the uboot terminal