[TWRP] S905X2 - TWRP Recovery 3.2.2

[Nayam]

TWRP_322 (1).zip

How to Use?

1. Put the attachment file in SDCard/USB Drive
2. Plug in the USB
3. Plug in the power while holding the reset button(found inside the AV Ports usually)
4. After you get into recovery, use remote to select Apply Update from SDCard
5. Select the TWRP_322.zip
6. You're now in TWRP.

Caution:
* Do not use the Reboot->System option from TWRP. You'll have to power off the device manually.
* This is only a temporary boot TWRP, your stock recovery will be intact after a reboot.

[ricklar]

Got this link from FreakTab.com had tested 3 different versions of TWRP for the new chip and reference board, only this version worked correctly version 3.2.3 =
https://onedrive.live.com/?authkey=%21A ... ion=locate

This TWRP worked great for the Tanix TX5-Max, just unzip and save to internal storage, then with an older version of TWRP app (1.19 or older) Flash TWRPrecovery.img to recovery.

[glm47]

Can you use this on mecool km9 pro ?

[ricklar]

Can you use this on mecool km9 pro ?

Try it and let us know, the temp TWRP_322.zip should work but your device is not rooted so that might be a problem. Because it doesn't eliminate factory Recovery, there should be no fear in testing it, they stock recovery will just give you an Error and report failure to update and Reboot.

[glm47]

No i tred it i get an error 21 and error 22

[ricklar]

Ok, that is what I figured, and all because no root access

[glm47]

Would you know how to root it without twrp then ?

[ricklar]

Don't have that KM9 Pro device, but I don't think there is any easy way to gain Root without fear of bricking that device.

[glm47]

Ok thank you for your help

[doktorspin]

You can reboot with this version of TWRP: you just go to Advanced, choose the terminal and type "reboot"!